Abstract:Microfiltration (MF) is a promising technique widely applied in the separation of solid-liquid mixtures. However, the potential application of MF was not explored much in the purification of tobacco extracts liquid. To be efficient, it necessitates having an assessment of the fouling mechanisms involved in MF processing. In this work, a thorough design of experiments was carried out to investigate various operating conditions, while specifying their effects on permeate flux were studied. Both single-stage and multistage Hermia models were used to elucidate the fouling mechanisms. The results of the single-stage Hermia model showed that cake layer formation was the dominant model, yet with fitting accuracy lower than 0.9; the type of fouling mechanism does relate to the operating conditions. Subsequently, the multistage Hermia model was used for determining the fouling mechanism during different time stages. It was found that the determinant coefficients R-2 were significantly increased and multiple fouling mechanisms could be coupled or occurred simultaneously. A ternary plot was established to visualize the contribution of each model and to bridge the relationship between the fouling mechanism and the operating conditions. Therefore, the proposed method is a valid, convenient tool when selecting optimal operating conditions with the lowest irreversible fouling. The flux recovery of fouled membranes exceeded 95% after successive cleaning with deionized water, a 1 wt% NaOH + 0.5 wt% SDS mixed solution, and a 0.5% (vol/vol) HNO3 solution. Practical Applications Ceramic microfiltration membrane could separate tiny particles and macromolecules from tobacco extracts liquid (TEL) while it can keep most of active ingredients. The present study aims to have a better understanding of the complex membrane fouling mechanism in the MF processing of TEL. The fouling mechanism involved in the MF of TEL was firstly reported and a new method to bridge operating conditions and the fouling mechanism was proposed. It demonstrated that it is feasible to reduce irreversible membrane fouling by changing operating conditions during the initial stage of the MF processing. Identification of fouling mechanisms in the present study could be used to postpone fouling of the membranes by optimizing the operating parameters, and reduce irreversible membrane fouling.

Study on mechanism and model of micro-filtration membrane filtration resistance

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Establishment and Mechanism Investigation of Partial Blocking Filtration Model of Microfiltration

Study on the model of partial blocking filtration mechanism in constant-rate microfiltration process of non-Newtonian fluid

SEPARATION MECHANISMS OF NANOFILTRATION

An Evaluation of the Relationship between Membrane Properties and the Fouling Mechanism Based on a Blocking Filtration Model

Estimation of Fouling Stages in Separation of Oil/water Emulsion Using Nano-Particles Al2O3/TiO2 Modified PVDF UF Membranes

Membrane Fouling Mechanisms: Membrane Characteristics and Mixed Liquor Properties

A transient biological fouling model for constant flux microfiltration

Influence of sludge composition on membrane fouling in membrane coupled anaerobic bioreactor

Dynamic Monte Carlo Simulation of Protein-Membrane Interaction and Its Implication on Micro-Filtration Process

CFD modeling of membrane fouling in hollow fiber ultrafiltration membrane under cross-flow filtration

Models for micro-filtration of the hydrolysate of steam-exploded wheat straw by xylanase using ceramic membrane

A Simple Method to Identify the Dominant Fouling Mechanisms during Membrane Filtration Based on Piecewise Multiple Linear Regression

Dual-objective for the Mechanism of Membrane Fouling in the Early Stage of Filtration and Determination of Cleaning Frequency: A Novel Combined Model

Membrane fouling mechanisms and permeate flux decline model in soy sauce microfiltration

Preparation of polyethylene porous tube membrane and fouling mechanism during the filtration process

A combined model for describing the trans-membrane pressure (P) variation in constant flux dead-end microfiltration (MF) process

An analytical model for membrane fouling evolution associated with gel layer growth during constant pressure stirred dead-end filtration

Identification of the coupled fouling mechanism involved in microfiltration of tobacco extracts liquid by multistage Hermia model