Abstract:Novel properties and applications of multilayered nanowires (MNWs) urge researchers to understand their mechanical behaviors comprehensively. Using the molecular dynamic simulation, tensile behaviors of Ti/Ni MNWs are investigated under a series of layer thickness values (1.31, 2.34, and 7.17 nm) and strain rates ( 1.0 × 10 8 s − 1 ≤ ε . ≤ 5.0 × 10 10 s − 1 ). The results demonstrate that deformation mechanisms of isopachous Ti/Ni MNWs are determined by the layer thickness and strain rate. Four distinct strain rate regions in the tensile process can be discovered, which are small, intermediate, critical, and large strain rate regions. As the strain rate increases, the initial plastic behaviors transform from interface shear (the shortest sample) and grain reorientation (the longest sample) in small strain rate region to amorphization of crystalline structures (all samples) in large strain rate region. Microstructure evolutions reveal that the disparate tensile behaviors are ascribed to the atomic fractions of different structures in small strain rate region, and only related to collapse of crystalline atoms in high strain rate region. A layer thickness-strain rate-dependent mechanism diagram is given to illustrate the couple effect on the plastic deformation mechanisms of the isopachous nanowires. The results also indicate that the modulation ratio significantly affects the tensile properties of unequal Ti/Ni MNWs, but barely affect the plastic deformation mechanisms of the materials. The observations from this work will promote theoretical researches and practical applications of Ti/Ni MNWs.

Influences of Tensile Strain and Strain Rate on the Electron Work Function of Metals and Alloys

The Influence of Crystal Defects on the Elastic Properties of Tungsten Metals

Effects of Elastic and Plastic Deformations on the Electron Work Function of Metals During Bending Tests

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Response of the Electron Work Function to Deformation and Yielding Behavior of Copper under Different Stress States

Understanding the Effect of Plastic Deformation on Elastic Modulus of Metals Based on a Percolation Model with Electron Work Function

Strain Rate and Temperature Effects on Tensile Behavior of Ti/Al Multilayered Nanowire: A Molecular Dynamics Study

Molecular Dynamics Simulation of Tensile Deformation Behavior at Nanometer Scale

Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves

Effect of drawing deformation on microstructure and mechanical properties of Fe-Cr-Co-W alloy

Strain-induced changes in electronic structures and work function for (0 0 1), (1 1 0) and (1 1 1) of AlCu3

Tribological Properties of AZ31 Alloy Pre-Deformed at Low and High Strain Rates Via the Work Function

Mechanical Deformation Behavior and Mechanism of Sn-58Bi Solder Alloys under Different Temperatures and Strain Rates

Strain-Induced Changes In Electronic Structures And Work Function For (001), (110) And (111) Of Alcu3

Strain hardening, strain rate sensitivity, and ductility of nanostructured metals

A strain rate dependent thermo-elasto-plastic constitutive model for crystalline metallic materials

Effects of mechanical-bending and process-induced stresses on metal effective work function

Temperature And Strain Rate Effects On The Strength And Ductility Of Nanostructured Copper

Molecular dynamics study on temperature and strain rate dependences of mechanical tensile properties of ultrathin nickel nanowires

Dependence of the Mechanical Behavior of Alloys on Their Electron Work Function—an Alternative Parameter for Materials Design

Work-hardening Effect and Strain-Rate Sensitivity Behavior During Hot Deformation of Ti–5Al–5Mo–5V–1Cr–1Fe Alloy