Abstract:Alkane mixture phase equilibria is required for a range of industrial applications, most particularly for the petroleum industries. Mixtures containing light and heavy normal alkanes are of even further significance due to their non-ideal thermodynamic behavior. In this work, for the first time, the ternary system of C 1 + C 10 + C 28 was investigated experimentally to obtain bubble point pressures at various concentrations and temperatures ranging from 373 up to 445 K. The synthetic method of phase equilibrium measurements was utilized, which is known to have high accuracy. The resulting bubble points for the mixtures ranged in pressure from about 3 MPa up to 6 MPa. The data indicated that methane concentrations had the greatest impact, not only on the magnitude of the bubble point pressure, but also on the slope of its temperature trend. The relative concentrations of n-decane and n-octacosane had far less impact on the bubble point curves. The results were also modelled using the Peng-Robinson equation of state, and it was found that this equation has the capability to predict the data with an AARD% of 5.1%. When temperature-independent binary interaction parameters were optimized to the data, the AARD% reduced to 2.4%. Although the components vary greatly in size, perhaps the success of the Peng-Robinson equation of state for this mixture could be attributed to the fact that it was developed for hydrocarbon mixtures, and so, a reason for its popularity in the petroleum industries, alongside its simplicity and ease of use.

(Vapour + Liquid) Equilibria of (N-Hexane + N-Hexadecane), (N-Hexane + N-Octane), and (N-Octane + N-Hexadecane)

Vapor–Liquid Equilibrium for the Binary Systems 1,1,2,3,3,3-Hexafluoro-1-propene (R1216) + 2,3,3,3-Tetrafluoroprop-1-ene (r1234yf) and 1,1,2,3,3,3-Hexafluoro-1-propene (R1216) + Trans-1,3,3,3-tetrafluoropropene (R1234ze(e))

Vapor–Liquid Equilibria for the Binary Systems Difluoromethane (R32) + Trans-1,1,1,4,4,4-hexafluoro-2-butene (r1336mzz(e)) and Fluoroethane (R161) + Trans-1,1,1,4,4,4-hexafluoro-2-butene (R1336mzz(e))

Measurement of Vapor Liquid Equilibrium for System of Ethyl Acetate-Pyridine at Different Pressures

Vapor-Liquid equilibria of the ternary system of methane + n-decane + n-octacosane at high pressures

Liquid Densities of N-Octane, Ethylcyclohexane and Their Binary Mixtures {(x) N-Octane) + (1 − X) Ethylcyclohexane} at Temperatures from (283 to 363) K and Pressures Up to 60 MPa

Liquid–liquid Equilibria of Multi-Component Systems Including N-Hexane, N-Octane, Benzene, Toluene, Xylene and Sulfolane at 298.15 K and Atmospheric Pressure

(Vapour+liquid) Equilibria for (2,2-Dimethoxypropane+methanol) and (2,2-Dimethoxypropane+acetone)

Vapor–Liquid Equilibrium for the Mixture Methane (CH4) + Ethane (C2H6) over the Temperature Range (126.01 to 140.01) K

Vapor–Liquid Equilibrium for the Mixture Nitrogen (N2) + Methane (CH4) in the Temperature Range of (110 to 125) K

Vapor−Liquid Equilibria for the Quaternary System Ethanol + Acetone + Benzene + Hexane

Liquid-Vapow Equilibria. III. The Systems Benzene-n-heptane, n-Hexane-chlorobenzene, and cyclohexane-nitrobenzene

(Vapour + Liquid) Equilibria for (2-Ethoxypropene + Acetone) and (2-Ethoxypropene + Butanone)

Vapor−Liquid Equilibria for the Binary Mixture Α-Pinene + Octane

Liquid Densities for N-Decane + P-Xylene Mixtures from 293.15 K to 363.15 K at Pressures Up to 60 MPa

Vapor–liquid Equilibria for Binary Α-Pinene + Alkanols System

High-Pressure Liquid Viscosity of N-Hexadecane/ethyl Octanoate Mixtures

High-pressure Densities of N-Decane+o-xylene Mixtures: Measurement and Modelling

Measurement on Vapor Pressure, Density and Viscosity for Binary Mixtures of JP-10 and Methylcyclohexane

Vapor–Liquid Equilibrium Study of Binary Mixtures of Chloroform, 2-Ethylhexanoic Acid, and Propylene Glycol Methyl Ether at Atmospheric Pressure

Vapor–liquid Equilibrium for Binary and Ternary Systems of Tetrahydrofuran, Ethyl Acetate and N-methyl Pyrrolidone at Pressure 101.3 Kpa