Abstract:Molten salt electrolysis is one of the most important methods to produce rare earth metals and their alloys. In this method, mixtures consisting of rare earth chlorides and alkali chlorides are usually used as electrolytes. The knowledge of the thermodynamic properties of electrolytes is essential to design and improve the electrolytic process. The relationship between the composition and the primary crystal temperature can be obtained through the phase diagram of the molten salt. Then the electrolysis temperature and electrolyte composition can be initially determined, which lays a foundation for further study of other properties. Since the most commonly used alkali chlorides in industry are LiCl, NaCl and KCl, the phase equilibrium data of LiCl-NaCl-KCl are bases for constructing the thermodynamic database of multicomponent chloride melts containing rare earths. This paper mainly focuses on the thermodynamic properties of the binary system LiCl-NaCl and the ternary system LiCl-NaCl-KCl. With regard to the binary system LiCl-NaCl, numerous researchers have used the thermal analysis method to experimentally measure its phase diagram. However, the data obtained by different researchers are quite different. Whether there exist intermediate compounds and whether it is an isomorphous phase diagram is still not confirmed. Furthermore, the existing experimental data were mostly measured by the cooling curve method from 1910 to 1960 and they are generally not consistent with each other. Besides, the deviation between the recently calculated phase diagram and experimental data is somewhat large. For instance, the temperature deviation between the calculated and measured solidus can be up to 30 K. With respect to the ternary system LiCl-NaCl-KCl, the measurement of the phase diagram has been performed by many researchers and the thermodynamic optimization has also been carried out. However, there is significant difference among these experimental data. And the results of previous optimization are inconsistent with FTsalt database of FactSage software. For example, there is an eutectic point in the liquidus projection of the phase diagram of LiCl-NaCl-KCl at 619 K, while according to the Fact Sage software there is only a minimum instead of an eutectic point and the temperature is 621 K. Therefore, the phase diagrams of LiCl-NaCl and LiCl-NaCl-KCl systems were measured using differential thermal analysis in this work. Then these systems were thermodynamically optimized based on the measured data, including phase diagram, enthalpy of mixing, activity, etc, in previous and current work using CALPHAD method. During the optimization, the modified quasichemical model was used to describe the liquid solution while the Compound Energy Formulism was employed to model the solid solution. According to our calculation. LiCl-NaCl has an isomorphous phase diagram with a minimum at xNuct=0.262 and 7' =820 K. Compared with the previous optimization results, the solidus calculated in this paper is closer to the experimental value. The calculated temperature at which the solid solution undergoes phase separation is within the range of experimental data. Apart from that, there is a minimum in the liquidus projection of LiCl-NaCl-KCl system, rather than a four -phase eutectic point. The corresponding component is 55%LiCl-8%NaCl-37%KCl and the temperature is 620 K, which is in common with the literature. Therefore, the thermodynamic parameters obtained in this work are more reasonable.

A new thermochemical splitting cycle of sodium chloride for chlorine and sodium hydroxide production

Investigation and Performance Study of A Dual-Source Chemisorption Power Generation Cycle Using Scroll Expander

Thermochemical Decomposition Cycle of Potassium Chloride of Borate System

Recent Advances in Nuclear Based Hydrogen Production With the Thermochemical Copper-Chlorine Cycle

A Clean and Membrane-Free Chlor-Alkali Process with Decoupled Cl2 and H2/NaOH Production

Thermal efficiency improvement of hydrogen production via thermochemical water splitting

Thermal design and performance optimization of the four-step Cu-Cl cycle coupled with clean energy for hydrogen production

Comprehensive Comparative Analysis of Open-Loop and Closed-Loop Iodine-Sulfur Thermochemical Cycle for Hydrogen Production

Low-temperature, Manganese Oxide-Based, Thermochemical Water Splitting Cycle

A Modified Ammonia-Water Power Cycle Using a Distillation Stage for More Efficient Power Generation

Thermochemical water-splitting structures for hydrogen production: Thermodynamic, economic, and environmental impacts

Simplification of the zinc-sulfur-iodine thermochemical cycle for the production of H 2 and CO

Thermal Efficiency Evaluation of Open-Loop Si Thermochemical Cycle for the Production of Hydrogen, Sulfuric Acid and Electric Power

Experimental Measurement and Thermodynamic Optimization of the Phase Diagram of LiCl-NaCl-KCl System

Reaction Kinetics and Product Evolution of Hydrolysis in Copper-Chlorine Thermochemical Cycle for Hydrogen Production

Thermochemical Dissociation of Water and Carbon Dioxide Via ZnSI Cycle for Hydrogen and Carbon Monoxide Production

Chemistry of the iron-chlorine thermochemical cycle for hydrogen production utilizing industrial waste heat

Journey of electrochemical chlorine production: From brine to seawater

A new carbon-negative hydrogen production cycle for better sustainability

A Novel Thermochemical Cycle for the Dissociation of CO2 and H2O Using Sustainable Energy Sources

Spinel Metal Oxide-Alkali Carbonate-Based, Low-Temperature Thermochemical Cycles for Water Splitting and CO2 Reduction