Abstract:Starting with the initial design stage, the ship resistance constitutes one of the most important hydrodynamic aspects. In order to generate and optimize the body lines plan, the ship resistance performance must be considered. In this case, both numerical and experimental methods must be applied to obtain the minimum ship resistance controlled by the speed domain. In the last years, numerical studies based on the Computational Fluid Dynamic (CFD) were implemented in the initial ship design stage in order to analyse the free-surface flow and to predict the ship resistance. The numerical optimization process of the hull forms must be validated by means of the experimental model tests in the specific towing tanks. The constant evolution of the numerical and experimental methodologies can be noted. As a consequence, the accuracy level of the ship resistance prediction is increased; though, difficult numerical problems can occur in case of the unconventional hull forms. Taking into account this aspect, a complex numerical and experimental investigation of the ship resistance problem and free-surface topology was performed in the case of the DTMB surface combatant. A parallel numerical simulation was carried out by using the viscous flow solver ISIS–CFD of the software FINE TM /Marine provided by NUMECA. The solver is based on the finite volume method to build the spatial discretization of the transport equation to resolve the Reynolds-Averaged Navier Stokes (RANS) equation. Closure to turbulence is achieved by making use of the k-ω SST model, while the free-surface is captured through an air-water interface based on the Volume of Fluid (VOF) method. For the validation purpose, the tank conditions are reintroduced in the numerical model to account for any banking effect, especially for the high speed cases. Experimental model tests were performed in accordance with the ITTC standard procedures, while the extrapolation process to the full-scale was obtained by using an in-house code, based on the ITTC 57 method. The experimental results are compared through with some internationally recognized towing tank experiments that have been performed for a similar ship model, showing a good agreement. Also, the numerical results are validated against the experimental data and showed to be within a satisfactory congruence.

Uncertainty Analysis in Ship CFD and the Primary Application of ITTC Procedures

Numerical simulation of water entry using CIP model

Numerical Simulation of Water Entry of Two-Dimensional Structures with Complex Geometry Using a CIP-based Model

Numerical Study of Turbidity Current over a Three-Dimensional Seafloor

Verification and validation of numerical calculation of ship resistance and flow field of a large tanker

Application of the NIPC-based uncertainty quantification in prediction of ship maneuverability

Numerical Simulation of Viscous Flow Around High Speed Monohull and Trimaran Ships

Application Progress of Computational Fluid Dynamic Techniques for Complex Viscous Flows in Ship and Ocean Engineering

Direct CFD Simulation and Experimental Study on Coupled Motion Characteristics of Ship and Tank Sloshing in Waves

Numerical Investigation on the Cavity Behavior and Hydrodynamic Performance of a Planing Air Cavity Ship

CFD numerical simulation of a container ship turning motion

Numerical Simulation of Ship Maneuvering Motions in Viscous Flow

Numerical and Experimental Investigation on the Free-surface Flow and Total Resistance of the DTMB Surface Combatant

Research on ship motion characteristics in a cross sea based on computational fluid dynamics and potential flow theory

Uncertainty Quantification for Cargo Hold Fires

Towards a full-scale CFD guideline for simulating a ship advancing in open water

Numerical Analysis of Fluid Flow Around Ship Hulls Using STAR-CCM+ with Verification Results

Difference in ship response in waves between strip and 3D methods based on integrated formulation

NUMERICAL MODELLING AND STUDY OF PARAMETRIC ROLLING FOR C11 CONTAINERSHIP IN REGULAR HEAD SEAS USING CONSISTENT STRIP THEORY

INVERSE UNCERTAINTY QUANTIFICATION OF CTF PHYSICAL MODEL PARAMETERS USING BAYESIAN INFERENCE

Numerical Simulation of Ship Free Roll Decay Motion in Viscous Flow