Abstract:Ni x Cu0.2Zn y Fe1.98O4 (x = 0.16, 0.26, 0.35, 0.43, 0.50; y = 0.8−x) ferrites were prepared via solid-state reaction. The influence of Ni2+ concentration on ferrites composition, microstructure, magnetic properties and DC-bias superposition characteristics was studied by XRD, SEM, XPS, and VSM. Then, the effect of magnetic properties on the DC-bias superposition characteristics was analyzed. The results showed that the ferrites sintered at 900 °C for 3 h were all in pure spinel phase with an average grain size of 7.5 μm and a relative density of about 5.15 g cm−3. With the increase in Ni2+ concentration, the saturation magnetization (M s ) and coercivity (H c ) of ferrites increased, but the magnetocrystalline anisotropy constant (K 1 ) first increased and then decreased. And the M s , H c , and K 1 of the specimen with x = 0.43 were 63.62 emu·g−1, 27.36 Oe, and 1813.17 Oe·emu·g−1, respectively. In particular, the specimen of x = 0.50 achieved the best DC superposition characteristics, where the H 70% was about 220 A m−1. The incremental permeability of the specimens decreased rapidly at a bias magnetic field <400 A m−1. The variation mainly originated from the domain wall displacement, and the rate of decrease was influenced by both M s and K 1 . At a bias magnetic field ≥400 A m−1, the incremental permeability of the specimens decreased slowly, mainly because the number of domain walls decreased until disappearing, and the specimens tended to become a single domain structure. And the rate of decrease of incremental permeability was mainly affected by K 1 .

Effect of Co2+ Substitution on the Electromagnetic Properties of Low-temperature-fired NiCuZn Ferrites

Effects of MgO addition on the DC-bias-superposition characteristic of low-temperature-fired NiCuZn ferrites

Effects of Microstructure on the Temperature Dependence of Relative Initial Permeability of NiCuZn Ferrites

Effects of Ni2+ concentration on the composition, structure, magnetic properties, and DC-bias superposition characteristics of NiCuZn ferrites

Effect of Divalent Metal Ions Substitution on the Magnetic Properties of Ba3Co2-Me Fe24O41 (me = Zn2+, Ni2+) Hexagonal Ferrites

Sintering, Microstructure and Magnetic Properties of Low Temperature Co-Fired NiCuZn Ferrites with Nb2O5 and MoO3 Additions

Structure, Morphology, and Magnetic Properties of High-Performance NiCuZn Ferrite

Effects of Fe2+ Content in Raw Materials on Mn–Zn Ferrite Magnetic Properties

Comparison of Magnetic Properties of Low-Temperature-Fired NiCuZn Ferrites under Low- and High-Bi2O3 Doping Modes

Effect of Zn Substitution on Morphology and Magnetic Properties of Cufe2o4 Nanofibers

Effect of Bi2O3 and Co2O3 co-doping on power loss characteristics of low-temperature-fired NiCuZn ferrites

Magnetic and Electrical Properties of Low-Temperature Sintered Mn-doped NiCuZn Ferrites

Effect of Copper Substitution on the Dielectric and Magnetic Properties of Low-Temperature-Sintered Z-type Ferrites

The influence of Lu substitution on the Microstructure, electromagnetic Properties, and impedance of NiZnCo ferrite

High frequency magnetic mechanism of Ni-substituted Co2Z hexagonal ferrite

Effect of Mn substitution on the magnetic properties of MgCuZn ferrites

Effects of high Mn component on properties of NiCuZn ferrite

Evaluation of the Electromagnetic Characteristics on Ag/NiCuZn Ferrite Sintered Bodies

Microstructure, magnetic, and power loss characteristics of low‐sintered NiCuZn ferrites with La2O3‐Bi2O3 additives

The Influence of Mn Dopant on the Electromagnetic Properties of Nicuzn Ferrite

The Effect of Sintering Temperature on the Densification and Magnetic Performance of NiCuZn-Ferrites (CuO: 0–6 wt.%)