Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Buckling of Sandwich Wide Columns

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Buckling of carbon fiber composite pyramidal truss core sandwich columns

Experimental and Numerical Investigation on the Crushing Behavior of Sandwich Composite under Edgewise Compression Loading

Buckling of axially loaded sandwich composite panels with reinforced calcium silicate faces and polyurethane cores

THE BUCKLING ANALYSIS OF SANDWICH COLUMNS REINFORCED BY METALLIC TUBES

Axial Low-Velocity Impact of Sandwich Columns with Aluminum Face-Sheets and Hexagonal Honeycomb Core

Stability and initial post-buckling of a standing sandwich beam under terminal force and self-weight

An Interactive Buckling Theory for Built-Up Beam-Columns and Its Application to Centrally Compressed Built-Up Members

EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Global buckling response of sandwich panels with additively manufactured lattice cores

Mechanical Behaviors of Carbon Fiber Composite Sandwich Columns with Three Dimensional Honeycomb Cores under In-Plane Compression

Buckling and post-buckling of anisogrid lattice-core sandwich plates with nanocomposite skins

Structural Response of All-Composite Pyramidal Truss Core Sandwich Columns in End Compression

Axial Behavior of Columns with Glass Fiber-Reinforced Polymer Composite Shells and Syntactic Foam Core

Buckling Analysis of Thin-Walled Composite Structures with Rectangular Cross-Sections under Compressive Load

Analytical and numerical analysis on local and global buckling of sandwich panels with strut-based lattice cores

Prediction of Critical Buckling Load on Open Cross-Section Columns of Flax/PLA Green Composites

Effect of Resinic Columns on Buckling and Vibration of a Composite Sandwich Plate

Mechanical Behavior and Failure of Composite Pyramidal Truss Core Sandwich Columns