Abstract:Purpose: The aim of this article is to investigate the feasibility of using a statistical shape model (SSM)-based reconstruction technique to derive a scaled, patient-specific surface model of the pelvis from a single standard anteroposterior (AP) x-ray radiograph and the feasibility of estimating the scale of the reconstructed surface model by performing a surface-based 3D/3D matching.Methods: Data sets of 14 pelvises (one plastic bone, 12 cadavers, and one patient) were used to validate the single-image based reconstruction technique. This reconstruction technique is based on a hybrid 2D/3D deformable registration process combining a landmark-to-ray registration with a SSM-based 2D/3D reconstruction. The landmark-to-ray registration was used to find an initial scale and an initial rigid transformation between the x-ray image and the SSM. The estimated scale and rigid transformation were used to initialize the SSM-based 2D/3D reconstruction. The optimal reconstruction was then achieved in three stages by iteratively matching the projections of the apparent contours extracted from a 3D model derived from the SSM to the image contours extracted from the x-ray radiograph: Iterative affine registration, statistical instantiation, and iterative regularized shape deformation. The image contours are first detected by using a semiautomatic segmentation tool based on the Livewire algorithm and then approximated by a set of sparse dominant points that are adaptively sampled from the detected contours. The unknown scales of the reconstructed models were estimated by performing a surface-based 3D/3D matching between the reconstructed models and the associated ground truth models that were derived from a CT-based reconstruction method. Such a matching also allowed for computing the errors between the reconstructed models and the associated ground truth models.Results: The technique could reconstruct the surface models of all 14 pelvises directly from the landmark-based initialization. Depending on the surface-based matching techniques, the reconstruction errors were slightly different. When a surface-based iterative affine registration was used, an average reconstruction error of 1.6 mm was observed. This error was increased to 1.9 mm, when a surface-based iterative scaled rigid registration was used.Conclusions: It is feasible to reconstruct a scaled, patient-specific surface model of the pelvis from single standard AP x-ray radiograph using the present approach. The unknown scale of the reconstructed model can be estimated by performing a surface-based 3D/3D matching.

3d Reconstruction Of A Patient-Specific Surface Model Of The Proximal Femur From Calibrated X-Ray Radiographs: A Validation Study

3-D reconstruction of a surface model of the proximal femur from digital biplanar radiographs.

Validation of statistical shape model based reconstruction of the proximal femur--A morphology study.

A System for 3-D Reconstruction of A Patient-Specific Surface Model from Calibrated X-ray Images

Reconstruction of patient-specific 3D bone surface from 2D calibrated fluoroscopic images and point distribution model.

Calibration of X-ray Radiographs and Its Feasible Application for 2D/3D Reconstruction of the Proximal Femur

Statistical Shape Model-Based Reconstruction Of A Scaled, Patient-Specific Surface Model Of The Pelvis From A Single Standard Ap X-Ray Radiograph

Automatic Reconstruction Of A Patient-Specific Surface Model Of A Proximal Femur From Calibrated X-Ray Images Via Bayesian Filters

Statistical Deformable Model-Based Reconstruction of a Patient-Specific Surface Model from Single Standard X-ray Radiograph

Patient-Specific 3D Reconstruction of a Complete Lower Extremity from 2D X-rays.

A 2D/3D correspondence building method for reconstruction of a patient-specific 3D bone surface model using point distribution models and calibrated X-ray images.

An Integrated Approach for Reconstructing a Surface Model of the Proximal Femur from Sparse Input Data and a Multi-Resolution Point Distribution Model: an in Vitro Study.

Reconstruction of Patient-Specific 3D Bone Model from Biplanar X-Ray Images and Point Distribution Models

Unsupervised reconstruction of a patient-specific surface model of a proximal femur from calibrated fluoroscopic images.

Accurate and robust reconstruction of a surface model of the proximal femur from sparse-point data and a dense-point distribution model for surgical navigation.

3 D reconstruction of femur based on 2 D/3 D registration

An Integrated System for 3D Hip Joint Reconstruction from 2D X-rays: A Preliminary Validation Study

Particle Filter Based Automatic Reconstruction Of A Patient-Specific Surface Model Of A Proximal Femur From Calibrated X-Ray Images For Surgical Navigation

PATIENT-SPECIFIC 3D RECONSTRUCTION OF A COMPLETE LOWER EXTREMITY FROM 2D X-RAYS: A CADAVERIC VALIDATION STUDY

Automatic Extraction Of Proximal Femur Contours From Calibrated X-Ray Images Using 3d Statistical Models: An In Vitro Study

Surface Reconstruction of Bone from X-ray Images and Point Distribution Model Incorporating a Novel Method for 2D-3D Correspondence