Abstract:Purpose: The aim of this article is to investigate the feasibility of using a statistical shape model (SSM)-based reconstruction technique to derive a scaled, patient-specific surface model of the pelvis from a single standard anteroposterior (AP) x-ray radiograph and the feasibility of estimating the scale of the reconstructed surface model by performing a surface-based 3D/3D matching.Methods: Data sets of 14 pelvises (one plastic bone, 12 cadavers, and one patient) were used to validate the single-image based reconstruction technique. This reconstruction technique is based on a hybrid 2D/3D deformable registration process combining a landmark-to-ray registration with a SSM-based 2D/3D reconstruction. The landmark-to-ray registration was used to find an initial scale and an initial rigid transformation between the x-ray image and the SSM. The estimated scale and rigid transformation were used to initialize the SSM-based 2D/3D reconstruction. The optimal reconstruction was then achieved in three stages by iteratively matching the projections of the apparent contours extracted from a 3D model derived from the SSM to the image contours extracted from the x-ray radiograph: Iterative affine registration, statistical instantiation, and iterative regularized shape deformation. The image contours are first detected by using a semiautomatic segmentation tool based on the Livewire algorithm and then approximated by a set of sparse dominant points that are adaptively sampled from the detected contours. The unknown scales of the reconstructed models were estimated by performing a surface-based 3D/3D matching between the reconstructed models and the associated ground truth models that were derived from a CT-based reconstruction method. Such a matching also allowed for computing the errors between the reconstructed models and the associated ground truth models.Results: The technique could reconstruct the surface models of all 14 pelvises directly from the landmark-based initialization. Depending on the surface-based matching techniques, the reconstruction errors were slightly different. When a surface-based iterative affine registration was used, an average reconstruction error of 1.6 mm was observed. This error was increased to 1.9 mm, when a surface-based iterative scaled rigid registration was used.Conclusions: It is feasible to reconstruct a scaled, patient-specific surface model of the pelvis from single standard AP x-ray radiograph using the present approach. The unknown scale of the reconstructed model can be estimated by performing a surface-based 3D/3D matching.

An Integrated Approach for Reconstructing a Surface Model of the Proximal Femur from Sparse Input Data and a Multi-Resolution Point Distribution Model: an in Vitro Study.

An Integrated Approach for Reconstructing Surface Models of the Proximal Femur from Sparse Input Data for Surgical Navigation

Accurate and robust reconstruction of a surface model of the proximal femur from sparse-point data and a dense-point distribution model for surgical navigation.

Reconstruction of patient-specific 3D bone surface from 2D calibrated fluoroscopic images and point distribution model.

3-D reconstruction of a surface model of the proximal femur from digital biplanar radiographs.

Surface Reconstruction of Bone from X-ray Images and Point Distribution Model Incorporating a Novel Method for 2D-3D Correspondence

Image-based Meshing of Patient-Specific Data:Converting Medical Scans into Highly Accurate Computational Models

Unsupervised reconstruction of a patient-specific surface model of a proximal femur from calibrated fluoroscopic images.

Use of A Dense Surface Point Distribution Model in A Three-Stage Anatomical Shape Reconstruction from Sparse Information for Computer Assisted Orthopaedic Surgery: A Preliminary Study

3d Reconstruction Of A Patient-Specific Surface Model Of The Proximal Femur From Calibrated X-Ray Radiographs: A Validation Study

Particle Filter Based Automatic Reconstruction Of A Patient-Specific Surface Model Of A Proximal Femur From Calibrated X-Ray Images For Surgical Navigation

Robust and accurate reconstruction of patient-specific 3d surface models from sparse point sets: a sequential three-stage trimmed optimization approach

Reconstruction of Patient-Specific 3D Bone Model from Biplanar X-Ray Images and Point Distribution Models

A Robust and Accurate Approach for Reconstruction of Patient-Specific 3D Bone Models from Sparse Point Sets.

A 2D/3D correspondence building method for reconstruction of a patient-specific 3D bone surface model using point distribution models and calibrated X-ray images.

Low-dose three-dimensional reconstruction of the femur with unit free-form deformation.

Bone Surface Reconstruction and Clinical Features Estimation from Sparse Landmarks and Statistical Shape Models: A feasibility study on the femur

Determining Geometrical Parameters by Particle Filter for Automatic Reconstruction of Surface Model of Proximal Femur from Biplanar Calibrated Fluoroscopic Images.

Statistical Shape Model-Based Reconstruction Of A Scaled, Patient-Specific Surface Model Of The Pelvis From A Single Standard Ap X-Ray Radiograph

Validation of statistical shape model based reconstruction of the proximal femur--A morphology study.

RECONSTRUCTION OF PATIENT-SPECIFIC 3DBONE MODEL FROM BIPLANARX-RAY IMAGES AND POINTDISTRIBUTIONMODELS