Abstract:Sediments play an important role in determining the quality of lakes, rivers and oceans as they can act as either a source or sink for pollutants. Once the input pollution is controlled, sediments as a secondary source of pollution can release the accumulated pollutants to overlying water.1 The organic matter content of sediments can also affect the structure of macroinvertebrate assemblages.2 To date, traditional sediments remediation methods include monitored natural recovery, in-situ treatment, and ex-situ treatment.3 The traditional methods are either expensive or not environmentally friendly, so it is crucial to find a cost-effective and environmentally friendly way to solve the contaminated sediments problem. Microbial fuel cell (MFC) technology is considered an environmentally friendly and promising approach for converting wastewater or solid waste into electricity.4–6 Recently, some studies have shown that sediment microbial fuel cell (SMFC) can alter the properties and enhance the removal of organic matter in sediment.7–9 Wang9 developed a three-dimensional floating biocathode to dispose river sediments, and concluded that the sediment organic matter content near the anode was removed by 29 %. Hong7 found that sediment organic matter around the electrodes became more humified, aromatic, and polydispersed, and had a higher average molecular weight, along with its partial degradation and electricity generation compared to that of the original sediment. Sajana10 studied the performance of SMFC by adding cellulose in freshwater and demonstrated effective cellulose degradation from aquaculture pond sediment and maintained the oxidized sediment top layer favourable for aquaculture. Zhou11 improved the SMFC performance by amendment of colloidal iron oxyhydroxide into sediments and concluded that high Fe(II) concentration in pore water of sediments led to high power production. Song12 found that the addition of biomass in appropriate proportions can enhance output power in SMFC. However, mass transfer limitations for electron donors to reach the anode and a low rate of oxygen reduction in cathodes were major limitations for power production.13 In freshwater environments, the maximum power densities in SMFC with felt graphite14 and carbon paper15 as cathode were 4 mW m–2 and 2 mW m–2 respectively. Song13 constructed SMFC with granule activated carbon cathode and stainless steel anode and obtained 3.5 mW m–2 maximum power density, and further increased to 11.2 mW m–2 by adding cellulose. Jiang16 built MFC with graphite fiber brush and enhanced TCOD removal rate from 11.3 % to 19.2 % for raw sludge. Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Construction and Operation of Freshwater Sediment Microbial Fuel Cell for Electricity Generation

Sediment Microbial Fuel Cell with Floating Biocathode for Organic Removal and Energy Recovery

Removal and Changes of Sediment Organic Matter and Electricity Generation by Sediment Microbial Fuel Cells and Amorphous Ferric Hydroxide

Enhancement of cellulose degradation in freshwater sediments by a sediment microbial fuel cell

Electricity Generation from Sediment Microbial Fuel Cells with Algae-Assisted Cathodes

Sediment microbial fuel cell with biochar-modified cathode for remediation of black-odorous water sediments and analysis of microbial community

Electricity Generation by Urban Black Smelly River Sediment-MFC and the Effect on Sediment Remediation

Enhanced Performance of Sediment Microbial Fuel Cell by Immobilization of Shewanella Oneidensis MR-1 on an Anode Surface

The performance of microbial fuel cell with sodium alginate and super activated carbon composite gel modified anode

Bio-cathode Materials Evaluation and Configuration Optimization for Power Output of Vertical Subsurface Flow Constructed Wetland - Microbial Fuel Cell Systems.

Sediment Microbial Fuel Cells with Algae-Assisted Cathodes for Electricity Generation and Bio-Treatment of Sewage Sludge

Fabrication of stainless steel mesh gas diffusion electrode for power generation in microbial fuel cell.

A Graphite-Granule Membrane-Less Tubular Air-Cathode Microbial Fuel Cell for Power Generation under Continuously Operational Conditions

Treatment of surplus sludge and electricity generation with sediment microbial fuel cell

Operating Characteristic of Microbial Fuel Cell Using Sludge

Power Generation in Dual Chamber Microbial Fuel Cells Using Dynamic Membranes As Separators

Simultaneous Sulfide Removal and Electricity Generation with Corn Stover Biomass As Co-Substrate in Microbial Fuel Cells

[Electricity Generation Using the Short-Arm Air-Cathode Microbial Fuel Cell].

Electrical Current Generation from a Continuous Flow Macrophyte Biocathode Sediment Microbial Fuel Cell (msmfc) During the Degradation of Pollutants in Urban River Sediment

Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Simultaneous Treatment of Chromium-Containing Wastewater and Electricity Generation Using a Plant Cathode-Sediment Microbial Fuel Cell: Investigation of Associated Mechanism and Influencing Factors