Abstract:To investigate the internal force response characteristics and reinforcement effects of the shield tunnel segment structure in the presence of ground load disturbances in the Hangzhou Metro, full-scale tests were conducted on three-ring misaligned assembled segments using a self-developed "Shield Tunnel Segment Hydraulic Loading System." The study examined the structural characteristics of tunnel segments under the influence of different ground resistance coefficients (λ) and eccentric loads (P), and explored the reinforcement effects of the internal tension ring method from multiple perspectives. The research results indicate that under different ground resistance coefficients (λ), the sensitivity of internal force response is concentrated in the waist concrete, with a maximum bending moment reduction of 88.8%. The effective rate of bending stiffness tends to flatten, joint bending moment transfer effects strengthen, and the bearing capacity of the segments significantly increases after reinforcement, leading to a more uniform overall structural response. Under different eccentric loads (P), the bending moment of the segments after reinforcement approximates central symmetry with a reduced distribution range. The rate of change of the effective bending stiffness (η) shifts from "rapid" to "slow," and the variation of joint bending moment transfer coefficient (ζ) stabilizes. The reinforcement with steel rings significantly enhances the overall stiffness of the segments and reinforces the joint bending moment transfer effect. The reinforcement effect of the segments can be evaluated through the bending moment transfer coefficient and effective bending stiffness. After reinforcement, the bearing capacity of the segments is noticeably enhanced, and significant forces are observed at two locations in the right waist joint, where the combination of steel plates and segments exhibits optimal performance.

METHOD FOR REINFORCEMENT CAGE LENGTH DETECTION IN THE CORE DRILLING HOLE

Point Cloud and Machine Learning-Based Automated Recognition and Measurement of Corrugated Pipes and Rebars for Large Precast Concrete Beams

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Charging Electric Field Characteristics of Reinforcement Cage in Cast-in-situ Pile

Topology optimization and numerical analysis on passive zone reinforcement of foundation pit by arch layout

Determining Lengths of Reinforcements in Bored in Situ Concrete Piles Using the Magnetic Method

Magnetic Anomaly Characteristics out of Reinforcement Cage in Cast-in-situ Pile

MAGNETIC ANOMALY CHARACTERISTICS INSIDE THE REINFORCEMENT CAGE OF THE CAST-IN-SITU PILE

Applying Mise-a-la-masse Method to Determine the Length of Reinforcement in Bored In situ Concrete Piles

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

Experiments and Numerical Simulation of the Reinforcement Effect of Channel-Steel-reinforced Shield Tunnel Segments under Unloading Conditions

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Influence of Skirt Reinforcement in Passive Zone on Deformation of Excavation

Quantitative Analysis of Magnetic Anomaly of Reinforcements in Bored In-Situ Concrete Piles ℜ

Reinforcement Effect of U-Steel Reinforced Shield Segment Under Excavation Unloading of Side Foundation Pit

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Monitoring data analysis on the influence of large deep foundation pit excavation on nearby metro shield tunnel

Study on the Coupling Mechanism and Reinforcement Effect of a Shield Tunnel Reinforced by Channel Steel under Side Pit Excavation

Numerical Analysis of Effect of Foundation Pit Excavation on Underneath Existed Shield Tunnel

Full-scale Experimental and Structural Characterization Study of Shield Tunnel Reinforcement under Ground Stacking Loads

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile