Abstract:This paper deals with the coupling problem between the dynamic behaviors and the tribological behaviors of the piston-liner systems in multi-cylinder internal combustion engines. Firstly, based on the correction of some errors in the equation of piston secondary motion, which have been employed by many authors for several years, a detailed mathematical model for the coupling problem between the dynamical and tribological behaviors in the piston-liner systems of multi-cylinder internal combustion engines is presented. Secondly, the lubrication and friction between the liner and piston in each cylinder is included applying the average flow model of the Reynolds equation. Thirdly, the vibration of each liner is computed through the finite element model of a four-cylinder engine block, by which not only the liner motions caused by the block vibration but also the local vibration and the local static deformation of each liner can be figured out and taken into account. Through theoretical analysis and computation, some conclusions can be drawn as: 1) Both the liner vibration and piston motion are different for different cylinder in a multi-cylinder internal combustion engine, and hence different piston-liner systems will have different tribological behaviors. 2) Different liners have coincident dynamic response on the whole, especially for the lower frequency components. However, differences still exist among the vibrations of different liners, and these differences are mainly owing to the higher frequency components. 3) The impacts of liner vibrations on the tribological behaviors in piston-liner systems are primarily ascribed to its higher frequency components.

Piston Set-cylinder Liner Coupled Heat Transfer Models and Its Application in Gasoline Engine

A Study on Heat Transfer Model for the Dynamic Contact Boundary Between Piston Ring and Cylinder Liner

3D Heat Transfer, Lubrication and Friction Coupled Study for Piston Ring-Liner on Diesel Engines

Simulation Study on Coupled Heat Transfer for Piston Set-Cylinder Liner

Simulation Study on Cyclic Transient Heat Transfer of Piston-cylinder Liner

Effect of Piston Ring Friction Heat on Piston-Liner Coupled System in Internal Combustion Engine

A New 3-D Multi-Physics Coupling Model for Lubricated Piston-Liner Systems

Research on the Factors Affecting the Lubrication and Frictional Characteristics of Piston Ring-liner Considering the Heat Conduction between Solid Walls

Numerical Modeling of the Coupled Convective Heat Transfer in the Cylinder Block and the Water Jacket of Engine

Coupling Problem Between the Dynamical and Tribological Behaviors in the Piston-Liner Systems of Multi-Cylinder IC Engines

Numerical Study Of Piston Skirt-Liner Elastohydrodynamic Lubrication And Contact By The Multigrid Method

Tribological Simulation and Design of Piston Skirt- Liner System to Reduce Friction of Automotive Engines

Heat Transfer Simulation of Combustion Chamber Components Coupled System under Transient Condition

A Numerical Simulation Of The Coupling Between Dynamic Behavior And Tribological Behavior In Cylinder-Piston System In Ic Engine

The Tribo-Dynamics Performance of the Lubricated Piston Skirt–Cylinder System Considering the Cylinder Liner Vibration

Application of 3-D Finite Element Analysis in Engine Design

The Flow and Heat Transfer Characteristics of Engine Oil Inside the Piston Cooling Gallery

Numerical Study Of Piston Skirt-Liner Lubrication Considering The Effects Of Deformation In Internal Combustion Engines

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

The Gas-Liquid Two-Phase Flow in Reciprocating Enclosure with Piston Cooling Gallery Application

Effects of Ring Pack Friction Heat on Temperature Fields of Piston Set-Liner