Improved domino logic for high speed design

Song Jia,Fei Liu,Lijiu Ji

DOI: https://doi.org/10.1049/el:20030422

2003-01-01

Electronics Letters

Abstract:Techniques are introduced to improve the speed of domino logic. With an inverted clock scheme, a serial transistor is removed and capacitances at the output node are reduced in the new structures. HSPICE simulation shows that over 20% performance enhancement is achieved.

What problem does this paper attempt to address?

High-Performance Current-Mode Logic Ternary D Flip-Flop Based on Bipolar Complementary Metal Oxide Semiconductor

Xianghong Zhao,Longhua Ma,Hongye Su,Jieyu Zhao,Weiming Cai

DOI: https://doi.org/10.1166/jno.2021.2976

2021-01-01

Journal of Nanoelectronics and Optoelectronics

Abstract:In this paper, a simple-structured and high-performance current-mode logic (CML) ternary D flip-flop based on BiCMOS is proposed. It combines both advantages of BiCMOS and CML circuits, which is with much more high-speed, strong-drive and anti-interference abilities. Utilizing TSMC 180 nm process, results of simulations carried out by HSPICE illustrate the proposed circuit not only has correct logic function, but also gains improvements of 95.6~98.4% in average D-Q delay and 16.2%~70.4 in PDP compared with advanced ternary D flip-flop. When compared at the same information transmission speed, proposed circuit is more competitive. Furthermore, it can perform up to high frequency of 15 GHz and drive heavier load. All the results prove that proposed circuit is high-performance and very suitable for high-speed and high-frequency applications.
High speed wide fan‐in designs using clock controlled dual keeper domino logic circuits

A. Anita Angeline,V. S. Kanchana Bhaaskaran

DOI: https://doi.org/10.4218/etrij.2018-0313

2019-04-01

ETRI Journal

Abstract:Clock Controlled Dual keeper Domino logic structures (CCDD_1 and CCDD_2) for achieving a high‐speed performance with low power consumption and a good noise margin are proposed in this paper. The keeper control circuit comprises an additional PMOS keeper transistor controlled by the clock and foot node voltage. This control mechanism offers abrupt conditional control of the keeper circuit and reduces the contention current, leading to high‐speed performance. The keeper transistor arrangement also reduces the loop gain associated with the feedback circuitry. Hence, the circuits offer less delay variability. The design and simulation of various wide fan‐in designs using 180 nm CMOS technology validates the proposed CCDD_1 and CCDD_2 designs, offering an increased speed performance of 7.2% and 8.5%, respectively, over a conventional domino logic structure. The noise gain margin analysis proves good robustness of the CCDD structures when compared with a conventional domino logic circuit configuration. A Monte Carlo simulation for 2,000 runs under statistical process variations demonstrates that the proposed CCDD circuits offer a significantly reduced delay variability factor.

telecommunications,engineering, electrical & electronic
Low-power Super-threshold FinFET Domino Logic Circuits for High- Speed Applications

Hu Jianping,Hong Bo,Li Dongmei,Han Chenghao

DOI: https://doi.org/10.2174/1874444301406010907

2014-01-01

Abstract:Domino logic circuits have faster operating speed than commonly used static logic ones, because they have lower input capacitances and no contention during transition.However, Domino logic circuits have more power dissipation than static logic ones, since their clock tress with high switch activity dissipates large energy.A low-power superthreshold computing scheme is proposed to reduce power dissipations of FinFET Domino logic circuits.The pull-down transistors of all FinFET Domino circuits are configured in parallel, and thus improve operating speed.Unlike nearthreshold circuits, super-threshold ones are supplied by much a larger supply voltage than the threshold voltage, but it is lower than the standard supply voltage.Super-threshold FinFET logic circuits can attain low power consumption with favorable performance, because FinFET devices operating on medium strong inversion regions can provide better drive strength than conventional CMOS ones.The basic Domino logic gates are compared with static logic ones in terms of energy consumption, delay, energy delay product (EDP), and maximum operation frequency with different voltages from near-threshold to super-threshold regions.All circuits are simulated with HSPICE at a PTM (Predictive Technology Model) 32nm FinFET technology.The results show that the Domino gates can operate faster than static ones.In addition, it is also shown that Domino gates exhibit the best EDP in super-threshold regions (about 700mV).Compared with the standard supply voltage of 1.0 V, the Domino gates supplied by 0.8V can attain energy reductions of more than 38.3% with a small performance penalty of about 14%.
A 64-Bit Lookahead Carry Chain in Inverted-Domino Logic

S Jia,F Liu,J Gao,L Liu,X Wang,TY Zhang,ZJ Chen,LJ Ji

DOI: https://doi.org/10.1109/edssc.2003.1283532

2003-01-01

Abstract:Here we present a novel 64-bit adder carry chain design implemented in Inverted-Domino (iDomino) logic that is an improved style over conventional Domino for better performance. In the proposed scheme capacitances at output node are reduced and foot transistor in Domino logic is absorbed into clock tree to increase circuit speed. A 64-bit lookahead carry chain is constructed and HSPICE simulation in 0.25um CMOS parameter shows that carry propagation can be done in less than 480ps and a 20% speed enhancement over Domino is achieved.
A New Method of Circuit Reduction Based on Logic State of Transistor

LI Xun-gen,LUO Xiao-hua,ZHU Hong-wei,YAN Xiao-lang

DOI: https://doi.org/10.3969/j.issn.1007-0249.2006.03.017

2006-01-01

Abstract:A new method of circuit reduction for memory logic parameter is proposed. The method simplifies the circuit by judging whether logic state of transistor alters or not while inputting specialized stimulate wave. The studies show it reduces the number of the transistor greatly and holds nicely functional performance and electrical characteristic of circuit. The precision of logic parameter extracted by this new method is very good and it cuts short greatly the extraction time. The experimental results show that it is efficient.
The Effect of Noise Robustness on Domino Using Silicon Nano Materials

Sandeep Garg,Tarun Kumar Gupta,Amit Kumar Pandey,Digvijay Pandey,Prince Rajpoot

DOI: https://doi.org/10.1007/s12633-024-02854-8

IF: 3.4

2024-01-28

Silicon

Abstract:This article describes a novel Low Voltage Noise Immune Domino Logic (LVNIDL), which can be used to create CMOS domino using Si Nanomaterials. In 32 nm nano size silicon CMOS technology, wide fan-in input domino OR gate have been proposed and have already undergone HSPICE simulation. For the transient analysis of domino gates in the simulation, a D.C supply voltage of 0.9 V and a frequency of 100 MHz are utilized. The proposed technique consumes 76.07% less power than the preceding conditional stacked keeper domino logic. Furthermore, when compared to the existing CPVT technique, the designed LVNIDL technique reduces maximum delay by 56.25%. The decrease in power consumption and propagation delay increases the energy-efficiency and speed of operation of the proposed domino logic as compared to existing techniques. The LVNIDL technique boosts the power delay product by up to 88.54% and the EDP by up to 95.31% when compared to earlier domino. This decrease shows the decrease In terms of unity noise gain (UNG), the LVNIDL technique outperforms the earlier domino by 1.09 to 1.47 times due to reduction in leakage current. This increase in UNG will make circuit more noise immune to the unwanted signals or glitches which is a major issue in existing domino techniques. The stand-by power consumption in the proposed technique shows a maximum reduction of 98.29% as compared to existing techniques which indicates improvement in battery life under idle condition.

materials science, multidisciplinary,chemistry, physical
INDIDO: A Novel Low-Power Approach for Domino Logic Circuits

Umayia Mushtaq,Md. Waseem Akram,Dinesh Prasad,Aminul Islam

DOI: https://doi.org/10.1088/1402-4896/ad5061

2024-05-25

Physica Scripta

Abstract:Power dissipation in Nanoelectronic circuits at advanced technology nodes is dominated by leakage power dissipation. This is due to an increase in short channel effects in the scaled transistors. The VLSI industry is seeking alternative options to enhance the performance of portable electronic systems by ensuring higher speed and reduced power dissipation. In the ultra-deep submicron (DSM) regime, a new device called the fin-shaped field effect transistor (FinFET) was developed to replace CMOS technology. FinFET, a multi-gate device, significantly reduces power dissipation compared to planer MOS (Metal Oxide Semiconductor ) transistor, but it doesn't entirely resolve the issue. To further reduce power dissipation in the ultra DSM regime, low power approaches are required. Domino logic, a widely-used dynamic logic, is commonly utilized in high-speed VLSI architectures. In this research work, a novel INput Dependent Inverter DOmino (INDIDO) logic approach for low-power domino logic circuits using FinFET devices is proposed. A comparative analysis between the proposed INDIDO method and the existing approaches is performed for domino logic circuits for various performance metrics at the 16 nm technology node. In this research, various circuits like domino buffer, domino OR, domino AND, domino XOR and domino half adder are designed using the proposed INDIDO approach. The proposed INDIDO FinFET buffer circuit offers significant improvement in energy efficiency and FOM (Figure of Merit) by 53.18 % and 82% respectively as compared to conventional FinFET footed domino buffer circuit. Beside this, proposed circuits like INDIDO OR, INDIDO AND, INDIDO XOR and INDIDO Half adder circuit follow the same trend as INDIDO buffer circuit and show better performance parameters in comparison to the existing low power domino approaches as well. In addition to this, the proposed INDIDO buffer circuits are also analyzed for PVT(process voltage and temperature) variability. This whole analysis makes us to conclude that proposed INDIDO approach reduces power dissipation and delay penalty, have high noise tolerance capacity, more immunity against PVT variations and high energy efficiency in comparison to the already existing techniques.

physics, multidisciplinary
A 4:1 Multiplexer using dual chirality CNTFET-based domino logic in nano-scale technology

Sandeep Garg,Tarun K. Gupta,Amit K. Pandey

DOI: https://doi.org/10.1080/00207217.2019.1663942

2019-09-16

International Journal of Electronics

Abstract:This paper proposes a 4:1 Multiplexer (MUX) designed using proposed Dual Chirality High-Speed Noise Immune Domino Logic (DCHSNIDL) technique for designing lower delay noise immune domino logic circuits in Carbon Nanotube Field Effect Transistors (CNTFETs) technology. Dynamic power consumption, speed and noise immunity of the circuit are improved by changing the threshold voltage of the CNTFETs. The chirality indices of the carbon nanotubes (CNTs) are varied to change the threshold voltage of the CNTFETs. Simulations are carried out for 32 nm Stanford CNTFET model in HSPICE for 2-, 4-, 8- and 16-input domino OR gates at a clock frequency of 200 MHz on a DC supply voltage of 0.9V. The proposed DCHSNIDL domino circuit reduces power consumption by a maximum of 61.77% and propagation delay by a maximum of 55.11% compared to Current-Mirror Based Process Variation Tolerant (CPVT) circuit in CNTFET technology. The proposed CNTFET-based domino technique shows a maximum reduction of 96.31% in power consumption compared to its equivalent circuit in CMOS technology for a 4-input OR gate. The proposed technique shows an improvement of 1.04× to 1.35× times in Unity Noise Gain (UNG) compared to various existing techniques in CNTFET technology. The 4:1 MUX designed using proposed technique has 48.91% lower propagation delay and consumes 52.80% lower power compared to MUX using CPVT technique.
High-Speed, Robust CMOS Dynamic Circuit Design

Lianzhang Lai,Tingao Tang,Yinyin Lin

DOI: https://doi.org/10.3969/j.issn.1674-4926.2006.06.010

2006-01-01

Chinese Journal of Semiconductors

Abstract:A novel circuit with a narrow pulse driving structure is proposed for enhancing the noise immunity and improving the performance of wide fan-in dynamic circuits. Also,an analytical mode that agrees well with simulations is presented for transistor sizing. Simulation results show that an improvement of up to 12% over the conventional technique at 1GHz is obtained with this circuit,which can run 1.6 times faster than the existing technique with the same noise immunity.
Clock Controlled Hybrid-latch Flip-Flops Design

Jia Song,Yan Shilin,Wu Fengfeng,Wang Yuan

DOI: https://doi.org/10.1109/icsict.2012.6466686

2012-01-01

Abstract:In order to obtain power efficient flip-flops, two novel Hybrid-latch schemes are introduced in this paper. They achieve high performance by shortening the critical data path and power efficiency by eliminating the inverter chain pulse generator. HSPCE simulation under SMIC 90nm process revealed that the two new flip-flop have excellent power and speed performance compared to the referenced design. They can reduce 44.5% and 51.4% power dissipation, 29.2%and 44.5% clock-to-output latency and 65.6% and 68.4% PDP.
Optimization of explicit-pulsed flip-flops for high performance

Xiaoyang Zhang,Song Jia,Yuan Wang,Ganggang Zhang

DOI: https://doi.org/10.1109/ICSICT.2008.4734927

2008-01-01

Abstract:Two novel structures for explicit-pulsed flip-flops are proposed in this paper. The charging and discharging time are greatly reduced due to the lower capacitive load of interval nodes in the new structures, and the short circuit power consumption is diminished by overcoming the race problem as well. Simulation results also indicate the new structures are ideal for high-speed and low-power digital design.
New Method for Low Power Sequential Circuit Design Based on Clock Gating

XU Yang,SHEN Ji-zhong

DOI: https://doi.org/10.3785/j.issn.1008-973x.2010.09.016

2010-01-01

Abstract:A new method based on clock gating technique was proposed to achieve a more optimal low power design for sequential circuit.First of all,obtain the circuit's behavior Karnaugh maps from the next states table or the state-transition diagram.Gate the redundant clock properly according to the actual situation,and gain the redundancy restraining signal.Some redundant clock needn't be blocked if the gating cost is too high.After that,change the marked maintain condition into don't-care condition,draw the next Karnaugh maps of flip-flops,and obtain the excitation functions.Finally,draw the circuit diagram based on the redundancy restraining signal and excitation functions,and make sure that the circuit can self-start.8421 binary coded decimal (BCD) synchronous decimal up counter and three bit Johnson counter as practical design examples using this new method were studied and simulated by Hspice.Simulation shows that these designs have correct logic function and can achieve large energy saving.Compared to existing designs,the proposed designs have either lower power dissipation or improved performance.
Domino: Graph Processing Services on Energy-Efficient Hardware Accelerator

Chongchong Xu,Chao Wang,Lei Gong,Lihui Jin,Xi Li,Xuehai Zhou

DOI: https://doi.org/10.1109/icws.2018.00042

2018-01-01

Abstract:Large-scale graphs processing, which draws attentions of researchers, applies in a large range of domains. However, large-scale graphs processing on traditional platforms suffers from difficulties including computation and memory inefficiency. To enhance the computation-efficiency and energy-efficiency, in this paper, we exploit graph processing services on the energy-efficient hardware accelerator, called Domino. Domino adopts the asynchronous model to process graphs, which is efficient for many graph algorithms, such as Breadth-First Search, Depth-First Search, and Single Source Shortest Path. Domino also proposes a specific data structure based on row vectors to present graphs, named Batch Row Vector. Besides, our work employs naive update mechanism and bisect update mechanism to perform the asynchronous control. Ultimately, we implement Domino on an advanced Xilinx Virtex-7 board, and experimental results demonstrated that Domino has a significant performance and energy improvement. Case studies in Domino achieve 1.47x-7.84x and 0.47x-2.52x average speedup for small-diameter graphs(e.g., com-youtube, WikiTalk, and soc-LiveJournal), over GraphChi on the Intel Core2 and Core i7 processors, respectively. Besides, compared to Intel Core i7 processors, Domino also performs a significant energy-efficiency that is 2.03x-10.08x for three small-diameter graphs and 27.98x-134.50x for roadNet-CA which is a graph with relatively large diameter.
Design of Low-Power High-Speed Divide-by-2/3 Prescalers with Improved True Single-Phase Clock Scheme

Song Jia,Shilin Yan,Yuan Wang,Ganggang Zhang

2014-01-01

Abstract:New design improvement aiming to reduce the power consumption of true single-phase clock-based dual-modulus divide-by-2/3 prescalers is presented. The first latch stages of TSPC FFs are merged to reduce power and capacitance. Also, a pass transistor is introduced to cut off short circuit current. Hspice simulation of the proposed scheme in 40nm process demonstrates best power efficiency and power-delay-product among referenced designs. Besides, it shows comparable speed with extended TSPC prescalers.
New Degrees of Freedom for High Performance Silicon Modulator Design

Xinbai Li,Fenghe Yang,Tiantian Li,Qingzhong Deng,Ruobing Chen,Zhiping Zhou

DOI: https://doi.org/10.1109/group4.2016.7739072

2016-01-01

Scientia Forestalis

Abstract:This paper introduces oblique and lateral components into interleaved junction. Analytical model to characterize the complex interleaved interfaces is proposed, achieving nearly 23% reduction on energy consumption and 50% on VπLπ compared with traditional lateral junctions.
Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Liang Geng,Jizhong Shen,Congyuan Xu

DOI: https://doi.org/10.1049/iet-cdt.2015.0139

2016-01-01

IET Computers & Digital Techniques

Abstract:In this study, a novel power efficient implicit pulsed-triggered flip-flop with embedded clock-gating and pull-up control scheme (IPFF-CGPC) is proposed. By applying an XOR-based clock-gating scheme in the pulse generating stage, which conditionally disables the inverter chain when the input keeps unchanged, IPFF-CGPC is able to gain low power efficiency by eliminating redundant transitions of internal nodes. Meanwhile, a pull-up control scheme is applied to enhance the discharging path and save short-circuit power when D makes 0'-1' transition. To further improve the robustness of the proposed design, the XOR-based comparator in the clock-gating scheme is replaced by a transmission gate-based comparator, which results in an enhanced version (IPFF-ECGPC). Based on the SMIC 65 nm technology, extensive post-layout simulation results show that IPFF-CGPC exhibits excellent power characteristic with a reduction of 32.06-85.89% against its rival designs at 10% data switching activity. Due to its power efficiency, its power-delay product (PDP) gains an improvement of up to 73.94% in the same condition. Moreover, IPFF-ECGPC also enjoys outstanding total-power and PDP efficiency at 10% data switching activity. Therefore, the proposed designs are suitable for power-constrained applications in very-large-scale integration designs which are speed-insensitive.
Design of Low-Power High-Speed Dual-Modulus Frequency Divider with Improved MOS Current Mode Logic

Wanlu Wang,Song Jia,Tao Pan,Yuan Wang

DOI: https://doi.org/10.1109/edssc.2018.8487126

2018-01-01

Abstract:One design technique that aims to reduce power consumption of MOS current mode logic dual-modulus frequency divider is presented in this paper. With combinational logic transferred the proposed scheme can obtain high working frequency. By merging the first master latches of CML DFFs, the simplified structure can achieve lower power consumption. Circuit simulation of the proposed structure in 28nm CMOS technology shows a 21% reduction of power consumption over conventional scheme is achieved at frequency of 56GHz.
New Dynamic Threshold MOS Structures for Low-Energy True-Single-Phase-Clocking Circuits

Ke Wu,Song Jia,Zhong Jian Chen,Xuewen Gan

DOI: https://doi.org/10.1109/EDSSC.2005.1635298

2006-01-01

Abstract:Higher speed and better saving of energy at low voltage can be gain simultaneously by adopting the dynamic threshold MOS circuit. In this paper, a new scheme was proposed by combining True Single Phase Clocking (TSPC) Logic with dynamic threshold technique. In this scheme the thresholds of the NMOS logic or PMOS logic change only when these transistors need to be turned on and keeps high threshold when they are shut down. And the scheme uses the charge recovery technique of the substrate to further reduce power. It is capable of operating at 0.8V or even lower. The proposed scheme is shown to be 33.45% faster and has 20.86% energy savings compared to the regular TSPC logic circuits, during HSPICE simulations. And last this scheme was further improved in speed.
A New Type of High-Performance Low-Power Low Clock-Swing TSPC Flip-Flop

Yingbo Hu,Zhaolin Li,Runde Zhou

DOI: https://doi.org/10.1109/icasic.2007.4415584

2007-01-01

Abstract:A new type of pulse-triggered true single phase clock (TSPC) flip-flop with low threshold voltage clock transistor and its several improved structures are proposed for high-performance low-power applications. Due to low clock-swing and double-edge triggering, the power consumption of the clock network is estimated to reduce by 78%. HSPICE simulation with 0.18 mum CMOS technology shows that their delay, power dissipation and PDP are reduced by 20~44%, 40~56% and 61~72% respectively, when compared with the existing Low-Swing Clock Double-Edge Triggered Flip-Flop (LSDFF).
Fast Simulation of Interconnect-Dominant Circuits

B Chen,HZ Yang,R Luo,H Wang

DOI: https://doi.org/10.1109/icasic.2003.1277505

2003-01-01

Abstract:As the convergence of programmable cores, memory blocks. sensors and other analog/RF circuits on system-on-a-chip (SoC) for networking and wireless applications is striding forward swiftly, there is an increased demand for accurate circuit-level verification of SoC designs. This paper presents a new simulation method of interconnect-dominant circuits via a two-step LU matrix factorization method. By using this new method, unnecessary repetitions of arithmetic operations are avoided in circuit analysis. As a result, plenty of simulation time is saved without losing accuracy. The simulation results show that this method is much more efficient than HSPICE while simulating interconnect-dominant networks.

Improved domino logic for high speed design

High-Performance Current-Mode Logic Ternary D Flip-Flop Based on Bipolar Complementary Metal Oxide Semiconductor

High speed wide fan‐in designs using clock controlled dual keeper domino logic circuits

Low-power Super-threshold FinFET Domino Logic Circuits for High- Speed Applications

A 64-Bit Lookahead Carry Chain in Inverted-Domino Logic

A New Method of Circuit Reduction Based on Logic State of Transistor

The Effect of Noise Robustness on Domino Using Silicon Nano Materials

INDIDO: A Novel Low-Power Approach for Domino Logic Circuits

A 4:1 Multiplexer using dual chirality CNTFET-based domino logic in nano-scale technology

High-Speed, Robust CMOS Dynamic Circuit Design

Clock Controlled Hybrid-latch Flip-Flops Design

Optimization of explicit-pulsed flip-flops for high performance

New Method for Low Power Sequential Circuit Design Based on Clock Gating

Domino: Graph Processing Services on Energy-Efficient Hardware Accelerator

Design of Low-Power High-Speed Divide-by-2/3 Prescalers with Improved True Single-Phase Clock Scheme

New Degrees of Freedom for High Performance Silicon Modulator Design

Design of Flip-Flops with Clock-Gating and Pull-Up Control Scheme for Power-Constrained and Speed-Insensitive Applications.

Design of Low-Power High-Speed Dual-Modulus Frequency Divider with Improved MOS Current Mode Logic

New Dynamic Threshold MOS Structures for Low-Energy True-Single-Phase-Clocking Circuits

A New Type of High-Performance Low-Power Low Clock-Swing TSPC Flip-Flop

Fast Simulation of Interconnect-Dominant Circuits