Synthesis of biodiesel from soybean oil by coupling catalysis with subcritical methanol

J YIN,M XIAO,A WANG,Z XIU
DOI: https://doi.org/10.1016/j.enconman.2008.08.008
IF: 10.4
2008-01-01
Energy Conversion and Management
Abstract:Biodiesel synthesis from soybean oil and methanol was investigated under supercritical and subcritical conditions. Under the supercritical conditions, the maximum methyl ester yield exceeded 98% when the molar ratio of methanol to oil was 42:1 and the reaction temperature ranged from 260°C to 350°C. In order to decrease the operational temperature and pressures and to increase the conversion efficiency of methanol, first co-solvent was added to the reaction mixture to improve the reaction process, and then a novel idea was presented in which catalysis and supercritical effect were coupled together. Thus, with 2.5wt% hexane, temperature of 300°C, methanol to oil ratio of 42, a 85.5% conversion is observed in 30min, while a 62.2% conversion is observed without hexane in the same condition; with less carbon dioxide, temperature of 300°C, methanol to oil ratio of 42, a 91.6% conversion is observed in 20min, while a 51.4% conversion is observed without carbon dioxide in the same condition; With only a little amount of potassium hydroxide as the catalyst (KOH/oil=0.1wt%), a 98% yield of methyl esters was obtained in 10min at a reaction temperature of 160°C and the molar ratio (methanol/oil) of 24:1. In contrast, above 1wt% of catalyst is required in the conventional alkali-catalyzed method; while only 6% yield of methyl ester was obtained at 260°C (corresponding to subcritical conditions) without the catalyst.
What problem does this paper attempt to address?