Preparation and gas-sensing properties of nano-CdIn2O4 material

Xiangfeng Chu,Xingqin Liu,Guangyao Meng

DOI: https://doi.org/10.1016/S0025-5408(99)00074-4

IF: 5.6

1999-01-01

Materials Research Bulletin

Abstract:Nanometer powders of the CdO–In2O3 system were prepared by a chemical coprecipitation method. The effects of preparation conditions on the phase constituents of the powders were investigated. Pure fcc spinel CdIn2O4 phase with a nonstoichiometric formula of Cd(In1−xCdx)2O4−x was obtained at a temperature above 500°C for a mixed precursor with Cd/In = 1.3/2. Atomic absorption spectrum analysis revealed that the molar ratios Cd/In of the precipitate and the precipitate sintered at 600°C for 4 h were both 1.08/2. The crystallite size of the powders was in the range of 14–26 nm, increasing with firing temperature. The phase was stable up to at least 800°C. The conductance–temperature characteristics of the nano-CdIn2O4 spinel phase were studied and determined by oxygen adsorption on the surface of the materials. The investigation of gas-sensing performance of the sensors demonstrated that the nano-CdIn2O4-based sensors have fairly high sensitivity and selectivity to C2H5OH and are promising for practical development.