Abstract:In this work, a ∼220 μm-thick heterogeneous remelted layer is achieved in the coarse-grained AZ41 Mg alloy by the laser surface remelting treatment. Microstructural evolution observations reveal that the remelted heterogeneous layer consists of gradient refined equiaxed α-Mg grains (average grain size from ∼4.6 μm in the bottom to ∼ 60 nm at the surface) and dispersed block-shaped nanoscaled β-Mg17Al12 precipitations (∼22.8 nm), which is obviously different from the favored coarse dendritic or cellular α-Mg grains and lamellar β precipitations during conventional laser processing. The formation of this remelted layer is attributed to constitutional supercooling caused by solute elements and the thermal undercooling generated by the high cooling rates based on optimized processing parameters and liquid nitrogen cooling. The heterogeneous nanostructured remelted layer makes the laser-treated sample has a high hardness of 1.51 GPa, a yield strength of 230.4 MPa and an ultimate tensile strength of 313.7 MPa with a good ductility (12.5%). The laser-treated samples also show the higher fatigue lifetimes in low-cycle as well as high-cycle fatigue tests, which are respectively 2.3 and 18.6 times higher than the original samples. In addition, the laser-treated specimen exhibits a 25% higher fatigue limit compared with the original sample. The synergistic strengthening mechanism including gradient grain refinement and dispersed nanoscaled precipitations are quantitatively discussed to improve strength-ductility synergy and strain hardening capacity in the laser-treated samples. This mechanism could effectively facilitate resisting the initiation and propagation of the fatigue microcracks, which was further validated by the in-situ transmission electron microscope observations. Our results in this study could be further applied for the modification of grain morphology and precipitation distribution for additive manufacturing applications, critical to the development of advanced structural Mg alloys with high service performance in practical engineering environments.

Solidification Microstructure of AZ91D Mg Alloy after Laser Surface Melting

Tailored Surface Characteristics of AZ91 Mg Alloy Induced by Laser Surface Melting

Microstructure and Wear Resistance of Laser Surface Melting-Treated AZ31B Magnesium Alloy in Cryogenic Medium

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Superior strength-ductility synergy and fatigue resistance of heterogeneous structured AZ41 Mg alloy by laser surface processing

Refined Microstructure and Enhanced Anticorrosion Properties of Mg–4Y–3Nd–0.5Zr Alloy Fabricated by Laser Surface Remelting

Laser processing of Mg-10Li-3Al-3Zn alloy:Part II- Improving corrosion resistance of multi-phase Mg alloys by laser surface processing

Microstructure and corrosion behavior of laser surface-treated AZ31B Mg bio-implant material

Redistribution and refinement of the dendrites in a Mg-Y alloy by laser surface remelting and its influence on mechanical properties

On the heterogeneous microstructure and strengthening mechanisms in a laser welding AZ80 magnesium alloy

Influence of Mg Content on Microstructure Coarsening, Molten Pool Size, and Hardness of Laser Remelted Al(- x)-Mg-Sc Alloys

Laser printed amorphous magnesium alloy: Microstructure, mechanical properties and degradation behavior

Analysis of microstructure, treatment pattern, and corrosion behaviour of AZ91D magnesium alloy processed by selective laser surface remelting

Solidification Behaviour and the Evolution of Microstructure in the Laser Cladding of Aluminium on Magnesium Substrate

Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution

The Influence of Heat and Cryogenic Treatment on Microstructure Evolution and Mechanical Properties of Laser-Welded AZ31B

3D Prediction of Microstructure Formation During Solidification of Mg-RE Alloy Processed by Laser Surface Remelting

Effects of Laser Surface Remelting on Microstructure and Corrosion Properties of Mg-12Dy-1.1Ni Alloy

Study on Porous Mg-Zn-Zr ZK61 Alloys Produced by Laser Additive Manufacturing

Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility