Abstract:We analyze progressive damage and failure of composite laminates by using a micromechanical bridging model and compare numerical and experimental results for three fracture problems, namely, the four-point bending, the simple tension, and the simple tension of a laminate with an open hole at its centroid. These problems involve fiber–matrix interface debonding, constituents’ damage, interlayer delamination, and localized damage due to stress concentration. Macroscopic constitutive equations of unidirectional lamina, derived from those of the fiber and the matrix by using the bridging model with the fiber material assumed to be linearly elastic and the matrix to be elasto-plastic obeying the Drucker–Prager yield criterion, are employed. Strains in each constituent of the composite are assumed to be infinitesimal for the additive decomposition of strains into elastic and plastic parts to be valid, and the incremental plasticity theory is used. Stresses in the two constituents are found from their values in the homogenized material by using a dehomogenization technique. The intra-layer damage is assumed to initiate at a material point when the failure criterion for either the fiber or the matrix is satisfied. Young’s modulus of a constituent is degraded by following a Weibull distribution. A finite element is deleted when an energy-based failure criterion is satisfied in it, and the analysis is continued till the structure fails. The delamination between adjacent plies is simulated by including a thin resin layer at the interface and studying failure initiation and propagation in it. The computed reaction force versus the displacement curves and the failure patterns in the three problems are found to agree with the corresponding experimental data.

Micromechanism of deformation in EMC laminates

Deformation Mechanism of EMC Materials and Applications for Future Deployable Space Structure

THEORETICAL STUDIES ON MICROBUCKLING MODE OF ELASTIC MEMORY COMPOSITES

Microbuckling Solution of Elastic Memory Laminates under Bending

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

A Theoretical Investigation into the Orientation of Buckling Direction of the Reinforcing Fibers in Emc Laminate

JUDGEMENT OF IN-PLANE/OUT-OF-PLANE MICROBUCKLING MODE FOR PACKAGED UNIDIRECTIONAL EMC LAMINATES

Nonlinear Bending Behavior of Unidirectional EMC Laminates

A Solution of Fiber Microbuckling for Packaged Unidirectional EMC Laminates

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

Micromechanical experiments of interlaminar deformation and damage in angle-ply thermoplastic composite laminates

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Revisiting the micro-buckling of carbon fibers in elastic memory composite plates under pure bending

Micromechanical Experiments of Interlaminar Deformation and Damage in Quasi-Isotropic Thermoplastic Composite Laminates

Micromechanical Progressive Damage Analysis of Inter- and Intra-Layer Failures in Fiber-Reinforced Composite Laminates

Compressive behaviors and deformation mechanism of carbon fiber reinforced epoxy composites: A microscopic and molecular dynamics perspective

Micromechanics-based Model of Single Crack Propagation in Engineered Cementitious Composites (ECC)

Macroscale Bending Large-Deformation and Microbuckling Behavior of a Unidirectional Fiber-Reinforced Soft Composite

Micromechanical Analysis of Strain Rate-Dependent Deformation and Failure in Composite Microstructures under Dynamic Loading Conditions

Mechanics of Pure Bending and Eccentric Buckling in High-Strain Composite Structures

Modeling viscoelasticity-viscoplasticity of high-strain composites for space deployable structures