Abstract:Magnesium and its alloy currently are considered as the potential biodegradable implant materials, while the accelerated corrosion rate in intro environment leads to implant failure by losing the mechanical integrity before complete restoration. Dense oxide coatings formed in alkaline silicate electrolyte with and without titania sol addition were fabricated on magnesium alloy using microarc oxidation process. The microstructure, composition and degradation behavior in simulated body fluid (SBF) of the coated specimens were evaluated. It reveals that a small amount of TiO2 is introduced into the as-deposited coating mainly composed of MgO and Mg2SiO4 by the addition of titania sol into based alkaline silicate electrolytic bath. With increasing concentration of titania sol from 0 to 10vol.%, the coating thickness decreases from 22 to 18μm. Electrochemical tests show that the Ecorr of Mg substrate positively shifted about 300∼500mV and icorr lowers more than 100 times after microarc oxidation. However, the TiO2 modified coatings formed in electrolyte containing 5 and 10vol.% titania sol indicate an increasing worse corrosion resistance compared with that of the unmodified coating, which is possibly attributed to the increasing amorphous components caused by TiO2 involvement. The long term immersing test in SBF is consistent with the electrochemical test, with the coated Mg alloy obviously slowing down the biodegradation rate, meanwhile accompanied by the increasing damage trends in the coatings modified by 5 and 10vol.% titania sol.

Effects of Micro-Arc Oxidation Coating on Corrosion Behavior of Mg-Y-Zn in Simulated Body Fluid

Biodegradable behaviors in simulated body fluid of Mg-Gd-Y-Zr alloy with micro-arc oxide coating

Degradation Behavior Of Micro-Arc Oxidized Zk60 Magnesium Alloy In A Simulated Body Fluid

Corrosion Mechanism of Micro-Arc Oxidation Treated Biocompatible AZ31 Magnesium Alloy in Simulated Body Fluid

Corrosion Resistance and Biodegradability of Micro-Arc Oxidation Coatings with the Variable Sodium Fluoride Concentration on ZM21 Magnesium Alloys

Microstructure and Corrosion Behavior of Coated AZ91 Alloy by Microarc Oxidation for Biomedical Application

Biocorrosion Resistance of Coated Magnesium Alloy by Microarc Oxidation in Electrolyte Containing Zirconium and Calcium Salts

Study on Micro-arc Oxidation of Mg-Zn-Y-Nd-Ca Magnesium Alloys

Corrosion Resistance and Surface Biocompatibility of a Microarc Oxidation Coating on a Mg–Ca Alloy

Long-term Corrosion Inhibition Mechanism of Microarc Oxidation Coated AZ31 Mg Alloys for Biomedical Applications

Influence of a MAO + PLGA Coating on Biocorrosion and Stress Corrosion Cracking Behavior of a Magnesium Alloy in a Physiological Environment

Effect of Calcium on the Microstructure and Corrosion Behavior of Microarc Oxidized Mg-xCa Alloys.

Evaluation of the Long-Term Anticorrosion Behavior of (OCP + Ca-P)/MAO Coated Magnesium in Simulated Body Fluids

In Vitro Degradation and Electrochemical Corrosion Evaluations of Microarc Oxidized Pure Mg, Mg-Ca and Mg-Ca-Zn Alloys for Biomedical Applications

Effect of Oxidation Time on the Corrosion Behavior of Micro-Arc Oxidation Produced Az31 Magnesium Alloys in Simulated Body Fluid

Corrosion resistance of ZrO 2 –Zr-coated biodegradable surgical magnesium alloy

Corrosion resistance of magnesium alloy coated by ultrasonic-micro arc oxidation in simulated body fluid

Electrochemical Characteristics of AZ31 Magnesium Alloys with Microarc Oxidation Coating

Biocorrosion behavior of micro-arc-oxidized AZ31 magnesium alloy in different simulated dynamic physiological environments

Biodegradation Behavior of Micro-Arc Oxidation Coating on Magnesium Alloy-from a Protein Perspective