Influence of the Severity of Reaction Conditions on the Promotional Effects of Tin in Pt–Sn/γ-Al2O3 Catalysts in Propane Dehydrogenation
Parisa Moghimpour Bijani,Abbas Ali Khodadadi,Saeed Sahebdelfar
DOI: https://doi.org/10.1134/s0965544124010079
IF: 1.258
2024-05-21
Petroleum Chemistry
Abstract:The influence of the severity of reaction conditions on the promotional effects of tin in bimetallic Pt–Sn/γ-Al 2 O 3 catalysts in the propane dehydrogenation was studied over a wide range of reaction conditions (550–600°C, H 2 /C 3 H 8 = 0.4–1.5 mol/mol). The catalysts containing 0.5 wt % Pt with variable (0–1.0 wt %) Sn loading were prepared by sequential impregnation and characterized by N 2 -physisorption, TPR, TPD, EDX, and TEM techniques. When 0.25 wt % tin was added to the Pt/γ-Al 2 O 3 catalyst, at H 2 /C 3 H 8 molar ratios of 0.8 and 1.5 and all temperatures, a sharp (up to 100%) increase in the propylene selectivity was observed. The propylene yield vs. Sn loading curves showed maxima near the Sn/Pt weight ratio of 1 independently of operating conditions. Upon addition of the optimum amount of Sn, the first-order decay rate constant decreased from 0.15 to 0.066 h –1 at 550°C and H 2 /C 3 H 8 = 0.4, which roughly corresponded to doubling of the catalyst lifetime under this condition. The promoting effect of Sn on the catalyst performance was more pronounced under more severe reaction conditions required for higher propane conversions, i.e., at higher temperatures and lower H 2 /C 3 H 8 ratios in the feed.
energy & fuels,engineering, chemical,chemistry, physical, petroleum, organic