Abstract:Cement solidification is a commonly used pre-treatment method for municipal solid waste incineration fly ash (MSWIFA) prior to sanitary landfill. However, the long-term environmental risk of cement-solidified MSWIFA blocks in the exposed scenario of zoning sanitary landfill remains unclear. In this study, the leaching characteristics of different heavy metals in cement-solidified MSWIFA blocks under deionized water and acid rain scenarios were firstly investigated. The leaching control mechanisms of heavy metals were also explored and applied to established mechanical models for the estimation of long-term environmental risk. Results revealed that Pb leaching from cement-solidified MSWIFA blocks was controlled by diffusion; Cu, Cr and As leaching was mainly controlled by surface wash-off and diffusion; and Ni leaching was mainly controlled by diffusion and dissolution. Additionally, the established bulk diffusion, first-order reaction/diffusion and diffusion/dissolution models could accurately fit the abovementioned three types of heavy metals with different leaching control mechanisms (R-2 > 0.95). Under acid rain scenarios, according to the prediction results of the calibrated models, the cumulative leaching amount of Pb in 718 d was higher than the limit in GB16889-2008, the cumulative leaching amount of Cu, Cr, As and Ni did not exceed the limit in GB 16889-2008 even in 50 years. Therefore, the long-term environmental risk was relatively high for Pb but was low for Cu, Cr, As and Ni in cement-solidified MSWIFA blocks. This finding could be attributed to the strong alkali environment of cement-solidified MSWIFA blocks (pH > 12) that induced Pb salts (e.g. Pb(OH)(2) and PbSO4) dissolution. Therefore, the removal of partially soluble Pb salts from freshly made cement-solidified MSWIFA blocks by water or natural rainwater (e.g. without final cover system) washing in the initial landfilling stage (e.g. the leachate drainage system remains functional) is an effective countermeasure to reduce the environmental risks in zoning sanitary landfill.

Formulation of Criteria for Pollution Control on Cement Products Produced from Solid Wastes in China

Release of Heavy Metals from Concrete Made with Cement from Cement Kiln Co-Processing of Hazardous Wastes in Pavement Scenarios

Health Risk Assessment of Ecological Cement in Feed Water Systems

Leaching of carbonated air pollution control residues using compliance leaching tests.

Evaluation of collaborative disposal of heavy metals in MSWI fly ash along with its environmental risk assessment

Heavy Metal Leaching Behaviour and Long-Term Environmental Risk Assessment of Cement-Solidified Municipal Solid Waste Incineration Fly Ash in Sanitary Landfill

Leaching Behavior of Pb and Zn in Air Pollution Control Residues and Their Modeling Prediction.

Resource recycling sustainability assessment in ready-mixed concrete manufactured on energy consumption and environmental safety in China

Pollutants generated by cement production in China, their impacts, and the potential for environmental improvement

Study on general industrial solid waste and carbon reduction in China: Coupling coordination model, life cycle assessment and environmental safety control

Analysis of the Test Methods of Heavy Metal in Eco-Cement

Characterization of the Release Potential of Heavy Metals in Cement Products from Co-processing Waste in Cement Kilns

Methodology for enacting pollution control standard of organic pollutants for contaminated soils

Utilization and Life Cycle Assessment of Low Activity Solid Waste As Cementitious Materials: A Case Study of Titanium Slag and Granulated Blast Furnace Slag.

Coprocessing of Industrial and Hazardous Wastes in Cement Kilns: A Review of Current Status and Future Needs in China

Leaching Characteristics of Heavy Metals During Cement Stabilization of Fly Ash from Municipal Solid Waste Incinerators

Life Cycle Assessment of Beneficial Use of Domestic Waste for Cement Production in China

Heavy Metals Leaching Toxicity and Concrete Performance of Water-Quenched Blast Furnace Slag after Adsorption

Field measurements on emission characteristics, chemical profiles, and emission factors of size-segregated PM from cement plants in China

The Life Cycle Inventory Study of Cement Manufacture in China

Full Life Cycle Emission Reduction Potential of Ultra-Low Emission Transformation in China's Cement Industry