Abstract:Multiplexed binary offset carrier (MBOC) spreading modulation will be widely applied in the next generation Global Navigation Satellite System (GNSS). The MBOC(6,1,1/11) power spectral density is a mixture of BOC(1,1) spectrum and BOC(6,1) spectrum, which has no restrictions on the time waveforms to produce the spectrum, allowing flexibility in implementation. For example, the time-multiplexed BOC (TMBOC) is used by GPS L1C, the composite BOC (CBOC) is used by Galileo El OS and the quadrature multiplexed BOC (QMBOC) is used by BDS B1C. The BOC(6,1) component is selected for the MBOC signals in order to narrow the auto-correlation peak, thereby improving the code tracking accuracy and anti-multipath performance. As in traditional MBOC tracking method, the BOC(1,1) component and the BOC(6,1) component are processed at the same time and then a composite autocorrelation function is generated, which has some flat or reversed slope near the main peak. Moreover, the method does not take full advantage of the BOC(6,1) performance as the ranging accuracy can be improved further. This paper investigated a tracking algorithm for MBOC signals based on split processing of the BOC(1,1) and BOC(6,1) components, which had been inspired by GPS L2P semi-codeless tracking technique. As in the proposed method, the BOC(1,1) and BOC(6,1) components are considered as two independent signals who share a common carrier. The receiver acquires the BOC(1,1) component and tracks it with a short integration time to adapt to dynamic environments. A longer integration time is then used for tracking the BOC(6,1) component to obtain a higher signal to noise and a better ranging accuracy. For sake of better utilizing the BOC(6,1) component, a closed loop architecture and an open loop architecture are proposed and investigated in the paper. As the two components are processed separately, the ranging potential of MBOC signals is going to be further developed without comprising the dynamic performance.

Unambiguous Technique for Multiplexed Binary Offset Carrier Modulated Signals Tracking

Pseudo-Correlation-Function-Based Unambiguous Tracking Technique for Sine-BOC Signals

A MBOC Signal Tracking Algorithm Based on Split Processing Technique

An Unambiguous Tracking Technique for Sine-BOC(kn, N) Modulated GNSS Signals.

Unbiased multipath mitigation technique for GPS time-multiplex binary offset carrier signal

An Unambiguous Tracking Technique for Cosine-Phased BOC Signals with Low Complexity

Multipath Mitigation for BOC Signals Based on Prompt-Assisted-Offset Correlator

An Unambiguous Synchronization Scheme for GNSS BOC Signals Based on Reconstructed Correlation Function

A Synchronization Algorithm for MBOC Signal Based on Reconstructed Correlation Function

Generalized Theory of BOC Signal Unambiguous Tracking With Two-Dimensional Loops.

An Offset Correlator Based Multipath Mitigation Method for Dual BPSK Tracking Technique of Wideband BOC Signals

Unambiguous sine-phased binary offset carrier modulated signal acquisition technique

Research on High-Dynamic Tracking Algorithms for FH-BOC Signals

Research and implementation of tracking algorithm for CBOC modulation navigation signal

General Design Method for Two-Dimensional Multicorrelator Antimultipath Tracking Loop for BOC Signals

Quadrature Multiplexed BOC Modulation for Interoperable GNSS Signals

Improving tracking accuracy with subcarrier assistance and code monitoring for BOC modulated signal.

Side-Peaks Cancellation Analytic Design Framework with Applications in Boc Signals Unambiguous Processing

Implementation of a dual estimate tracking based multipath mitigation method on a software receiver

A Novel Unambiguous Composite Binary Offset Carrier(6, 1, 1/11) Tracking Based on Partial Correlations

High-precision unambiguous tracking technique for BDS B1 wideband composite signal