Abstract:The treatment effect of the combination process (pre-ozonation→high-density clarifier→sand filter→post ozonation→biological activated carbon(BAC) filter) was much better than that of the conventional process in treating the Huangpu River water, which is especially suit to high organic material and NH4 +-N in water. The removal efficiencies of CODMn and NH4 +-N by the post ozonation-BAC process were up to 30.4% and 18.9% respectively. And as the pre-ozonation process played a better role than pre-chlorination process in aid-coagulation, the removal efficiencies of CODMn and NH4 +-N were up to 29.6% and 81% respectively in traditional part of combination process. However, the removal efficiencies of CODMn and NH4 +-N were only 22.3% and 61.5% in the conventional process. In addition, the concentrations of algae toxins, trihalomethanes, bromate, molecular weight distribution and the related parameters of the BAC effluent were also investigated. The results show that the organic material with low molecular weight can be more easily removed by the post ozonationBAC processes (removal efficiency of organic material with molecular weight less than 1 kD is more than 70%). Tihalomethanes formation potential is 41% less than that of the conventional process. Besides, the microcystin and bromate concentrations are lower than drinking water standards in China. Moreover, the free chlorine disinfection can be used because the NH4 +-N can be mostly removed by the combination process, which can avoid the generation of nitrosamine as well as the odor and test problem by chloramine disinfection. However, the combination process also has some disadvantages such as the growth of algae on the purification structures during high-temperature season as the reaction time of ozone is relatively short. This problem may be solved by the combinated pre-ozonation and pre-chlorination process.

Study on Removal Efficiency of Atrazine by O3/BAC Process

Comparison of O3 - BAC Combination and Conventional Processes on Removal of Pollutants for Treating Drinking Water

S-triazine herbicides removal by granular activated carbon

Insights into Atrazine Degradation by Persulfate Activation Using Composite of Nanoscale Zero-Valent Iron and Graphene: Performances and Mechanisms

Simultaneous regeneration of activated carbon and removal of adsorbed atrazine by ozonation process: From laboratory scale to pilot studies

The effect of pre-treatments on atrazine removal from source water by microbubble ozonation

Ac/O-3-Bac Processes for Removing Refractory and Hazardous Pollutants in Raw Water

Insights into the novel oxidation process of ozone/peracetic acid: Kinetics evaluation, degradation pathways, and toxicity assessment

Comparison of O3-BAC and GAC for Removing Micropollutants from Drinking Water

Pilot-scale Study on O_3/BAC Process for Advanced Treatment of Miyun Reservoir Water

Heterogeneous catalytic ozonation of atrazine with oxygen vacancy-rich cu-loaded and ce-loaded attapulgite: Efficiency, mechanism and environmental application

Treatability of Organics and Nitrosamine Precursors by the Conventional/o3-Bac Process

Selection Of Activated Carbon In Advanced Water Treatment By O-3-Bac

ADVANCED TREATMENT TECHNOLOGIES OF PAPER MILL WASTEWATER BY OZONE-BIOLOGICAL AERATED FILTER PROCESS

A Novel Advanced Oxidation Process Using Iron Electrodes and Ozone in Atrazine Degradation: Performance and Mechanism

Study on Catalytic Ozonation/Bac Process for Advanced Drinking Water Treatment

[Ozone-Biological Activated Carbon for Advanced Removal of Typical Persistent Organic Pollutants from Micro-Polluted Source Water in the Yangtze Delta Region].

Heterogeneous catalytic ozonation of atrazine with Mn-loaded and Fe-loaded biochar

Preparation, Performances and Mechanisms of Co@AC Composite for Herbicide Atrazine Removal in Water

Effects of ammonia nitrogen concentration on the selection of advanced treatment process with activated carbon

Water Quality Safety of Ozonation and Biologically Activated Carbon Process in Application