The Use of Co2-Co Gas-Mixtures to Study Adsorption on Chromia-Promoted Magnetite at Water-Gas Shift Temperatures

JE KUBSH,Y CHEN,JA DUMESIC
DOI: https://doi.org/10.1016/0021-9517(81)90214-1
IF: 7.3
1981-01-01
Journal of Catalysis
Abstract:The adsorption of CO and CO2 on chromia-promoted magnetite was studied volumetrically at temperatures near 650 K using CO2CO gas mixtures in which magnetite is the thermodynamically stable form of iron oxide. Specifically, studies were conducted (i) at 637 K using CO2CO gas mixtures with partial pressure ratios, PCO2PCO, equal to 5.45, 2.37, and 1.56, and (ii) at 613, 637, and 663 K using a CO2CO gas mixture with PCO2PCO equal to 5.45. By measuring the changes in total pressure and gas composition when a known dose of gas mixture was exposed to the sample, the individual surface coverages by CO and CO2 were determined. At constant temperature and PCO, the surface coverage by CO was found to decrease with increasing PCO2; and, at constant temperature and PCO2. the surface coverage by CO2 was found to decrease with increasing PCO. These data could be fit by either a one-site or a two-site model. In the first model, CO and CO2 compete for a fixed number of adsorption sites; and, in the second model, CO adsorption is associated with surface oxygen vacancies while CO2 adsorption is associated with surface oxygen species. In both models, the total number of adsorption sites comprises approximately 21% of the BET surface area. While the adsorption data alone cannot distinguish between these models, the two-site model is favored by its ability to provide a quantitative correlation of the CO and CO2 adsorption data with independent measurements of the oxygen content of the surface.
What problem does this paper attempt to address?