Abstract:Gas turbines are widely used as important equipment for electricity generation on islands and offshore platforms. During the operation of a gas turbine, the flame shape in the combustion chamber undergoes variations in response to changes in parameters such as gas turbine load, fuel distribution, and burner structure. These alterations in flame shape exert influence on combustion instability, emissions, and load characteristics. This study explores the variations in flame transition, emissions, and operating parameters among three distinct center stage structures: namely, the non-premix center stage (NPCS), premix center stage (PCS), and enhanced premix center stage (PCSE). The investigation is conducted using a heavy-duty gas turbine hybrid burner on a full temperature, full pressure, and full-size single burner experimental bench. Simultaneously, a multi-parameter numerical simulation regarding the influence of the central fuel split on flame shape analysis was conducted using the PCS burner under the design point for a more in-depth understanding of the mechanisms and for influencing factors associated with flame transition. The findings indicate that variations in flame transition loads among different central stage structures: for the NPCS burner, the transition occurs between 45% and 50% load; for the PCS burners, it takes place between 60% and 65% load; for the PCSE burners, it shifts between 55% and 60% load. Additionally, a reduction in NOx emissions is observed during the flame transition process. Furthermore, it was found that decreasing the central stage fuel results in a decline in flame angle for the same burner structure. As the central stage fuel diminishes to a specific value, the flame shape undergoes a sudden change. Further reduction in central stage fuel does not significantly affect the flame shape and temperature distribution.

Experimental Study of Combustion on a Micro Gas Turbine Combustor

Numerical simulation of pollutant emissions in a can-type low NO x gas turbine combustor

Research on combustion performance of a micro-mixing combustor for methane-fueled gas turbine

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Design and Numerical Simulation of a Micro-Gas Turbine Combustor

Experimental Investigation on Thermal and Combustion Performance of a Combustor with Microchannel Cooling

Study on the Flame Transition Characteristics of a Gas Turbine Combustor

Design & Test of a Syngas Double-Swirled Non-Premixed Combustor in Gas Turbine

Study on Combustion Performance of Micro Gas Turbine Combustor with Different Fuel

Study on combustion and emission characteristics of a heavy-duty gas turbine combustor fueled with natural gas

Performance Test Of Dln Combustor For 110 Mw Heavy-Duty Gas Turbine

Emission Characteristics And Axial Flame Temperature Distribution Of A Circumferential Reverse Flow Combustor

Combustion Characteristics of A Micro Gas Turbine Combustor with Gamma-Shaped Porous Media Dome

Combustion Performance of an Adjustable Fuel Feeding Combustor under Off-Design Conditions for a Micro-Gas Turbine

Experimental investigation of a micro-combined cooling, heating and power system driven by a gas engine

Experimental Study on a Double-Swirled Non-Premixed Humid Air/Syngas Burner

Experimental Investigation of a FLOX®-Based Combustor for a Small-Scale Gas Turbine Based CHP System Under Atmospheric Conditions

Effect of fuel flexibility on combustion performance of a micro-mixing gas turbine combustor at different fuel temperatures

Experimental Research on Ignition and Lean Blowout for Micro Gas Turbine Ethanol Combustor

Development of a micro gas turbine combustor with T-type vaporizers

B109 EMISSION CHARACTERISTICS AND AXIAL FLAME TEMPERATURE DISTRIBUTION OF A CIRCUMFERENTIAL REVERSE FLOW COMBUSTOR(Combustion-3)