Abstract:In this work, the influence of a small-molecule material, tris(8-hydroxyquinoline) aluminum (Alq(3)), on bulk heterojunction (BHJ) polymer solar cells (PSCs) is investigated in devices based on the blend of poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV) and [6,6] phenyl-C(61) butyric acid,methyl ester (PCBM) By doping Alq(3) into MEH PPV PCBM solution, the number of MEH-PPV excitons can be effectively increased due to the energy transfer from Alq(3) to MEH-PPV, which probably induces the increase of photocurrent generated by excitons dissociation However, the low carrier mobility of Alq(3) is detrimental to the efficient charge transport, thereby blocking the charge collection by the respective electrodes The balance between photon absorption and charge transport in the active layer plays a key role in the performance of PSCs For the case of 5 wt % Alq(3) doping, the device performance is deteriorated rather than improved as compared with that of the undoped device On the other hand, we adopt Alq(3) as a buffer layer instead of commonly used LiF All the photovoltaic parameters are improved, yielding an 80% increase in power conversion efficiency (PCE) at the optimum thickness (1 nm) as compared with that of the device without any buffer layer Even for the 5 wt % Alq(3) doped device, the PCE has a slight enhancement compared with that of the standard device after modification with 1 nm (or 2 nm) thermally evaporated Alq(3) The performance deterioration of Alq(3) doped devices can be explained by the low solubility of Alq(3), which probably deteriorates the bicontinuous D-A network morphology, while the performance improvement of the devices with Alq(3) as a buffer layer is attributed to the increased light harvesting, as well as blocking the hole leakage from MEH-PPV to the aluminum (Al) electrode due to the lower highest occupied molecular orbital (HOMO) level of Alq(3) compared with that of MEH-PPV

The Impact of Alq3 as an Exciton Blocking Layer on Organic Solar Cells

Photocurrent analysis of organic photovoltaic cells based on CuPc/C_(60) with Alq_3 as a buffer layer

Photocurrent analysis of organic photovoltaic cells based on CuPc/C <sub>60</sub> with Alq <sub>3</sub> as a buffer layer

Study on the influence of embedded structure of carbon quantum dots of the organic solar cells with the territory active layer structure of P3HT: PC 61 BM: CQDs

The Evolution of Alq3 Films Exposure to Air

Optoelectronic Analysis of Organic Solar Cells with Bphen as a Buffer Layer

Different Materials As A Cathode Modification Layer on the Impact of Organic Solar Cells

Plasmonic Ag@Oxide Nanoprisms for Enhanced Performance of Organic Solar Cells

Film Thickness Effect on the Performance of Small Molecular Solar Cell

The Study on Organic Solar Cells Based on Bathocuproine As an Exciton Blocking Layer

Influence of Small-Molecule Material on Performance of Polymer Solar Cells Based on MEH-PPV:PCBM Blend

Organic light-emitting diodes made with poly (N-vinylcarbazole) (PVK) and 8-hydroxyquinoline aluminium (Alq3)

Degradation Of Small-Molecule Organic Solar Cells

Over 19 % Efficienct Fi Cienct Ternary Organic Solar Cells Enabled by Tuning Charge Behaviors Through Quinoxalineimide-Based Y-type Acceptors

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Alkyl ammonium iodide-based ligand exchange strategy for high-efficiency organic-cation perovskite quantum dot solar cells

Over 19 % Efficiency Ternary Organic Solar Cells Enabled by Tuning Charge Behaviors Through Quinoxalineimide-based Y-type Acceptors

Over 19 % efficienct ternary organic solar cells enabled by tuning charge behaviors through quinoxalineimide-based Y-type acceptors

Highly Efficient Layer‐by‐Layer Processed Quaternary Organic Solar Cells with Improved Charge Transport and Reduced Energy Loss

Effect of buffer layers on the performance of organic photovoltaic cells based on copper phthalocyanine and C60

Efficient Multilayer Organic Solar Cells Using the Optical Interference Peak