Abstract:In order to improve the oxidation resistance of carbon fibers reinforced carbon matrix composites (C/C) and the thermal shock resistance of ultra-high temperature ceramics (UHTCs), large numbers of ZrB2 based particles were introduced into C/C composites to fabricate the C/C-UHTC composites by powder infiltration (PI) and isothermal chemical vapor infiltration (ICVI). The effects of UHTC additive, heat flux and ablation time on the ablation behaviors of the C/C-UHTC composites were investigated through exposure to an oxyacetylene torch flame with ultra-high temperature. The ZrB2 addition to the C/C pronouncedly improved the ablation resistance of the material under a 3920kW/m2 heat flux and the C/C–ZrB2 showed a better ablation-resistive property compared to the C/C–4ZrB2–1SiC, C/C–2ZrB2–1SiC, C/C–2ZrB2–1SiC–1HfC and C/C–2ZrB2–1SiC–1TaC. With decrease of the heat flux from 3200 to 2380kW/m2, the presence of a small amount of SiC in the C/C–ZrB2 was found to have a positive role of improving the ablation resistance; the C/C–4ZrB2–1SiC exhibited a good ablation-resistive endurance under 2380kW/m2. The HfC addition was proved to effectively enhance the ablation property of the C/C–1ZrB2–2SiC while the TaC addition severely deteriorated the property.

Ablation Behavior of ZrB2–SiC–ZrO2 Ceramic Composites by Means of the Oxyacetylene Torch

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Ablation performance of C/C-ZrC-SiC composites with in-situ YSi 2 -doped ZrC-SiC-ZrSi 2 coating under oxyacetylene torch

Ablation properties and mechanisms of BN-coated Cf-reinforced SiBCNZr ceramic composites under an oxyacetylene combustion torch

Cyclic ablation behavior of C/C–ZrC–SiC composites under oxyacetylene torch

Effect of surface microstructure on the temperature response of ZrB 2 –SiC composites

Oxidation of Short Carbon Fiber Reinforced Zrb2-Sic Ceramics under Atmospheric and Oxyacetylene Torch Conditions

Ablation Behavior and Mechanism of Double-Layer ZrB2-based Ceramic Coating for Lightweight Carbon-Bonded Carbon Fiber Composites under Oxyacetylene Flame at Elevate Temperature

Oxidation Behavior of ZrB2–SiC–ZrO2 Ceramic Composites in the Temperature Range of 800–1200°C

Ablation behavior of high-entropy carbides ceramics (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C upon exposition to an oxyacetylene torch at 2000 °C

Ablation behaviors of ultra-high temperature ceramic composites

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Ablation behavior of C f /ZrC–SiC ultra–high temperature ceramic composites in oxyacetylene torch and plasma wind tunnel

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Ablation resistance behavior of ZrB2-SiC ultra-high temperature ceramics with Y2O3 addition

Ablation-resistance of ZrB2-SiC Coating under Oxygen-propane Torch Flame Prepared by Atmospheric Plasma Spraying

Effect of SiC Content on the Ablation and Oxidation Behavior of ZrB2-Based Ultra High Temperature Ceramic Composites

Ablation behavior of C/C–Zr1-xHfxC-SiC composites under an oxyacetylene flame at above 2500 °C

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Ablation Mechanism And Properties Of In-Situ Sialon Reinforced Bn-Sio2 Ceramic Composite Under An Oxyacetylene Torch Environment

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C