Abstract:In this work, molecular dynamics simulation and linear elastic fracture mechanics were employed to analyze the crack-tip behavior of a Mode I crack in nanocrystalline titanium. The effects of crystalline orientation, twin boundary and stacking fault on crack propagation were taken into account. Simulation results demonstrate that the crack-tip behavior and thus the crack propagation mode strongly depend on crystalline orientations and plane defects. Cracks lying on the hexagonal close-packed basal plane, the prismatic plane, or along a stacking fault plane defect propagate in a brittle manner, without involving proper dislocation emissions and twin nucleations in the crack-tip vicinity. In contrast, cracks show a ductile propagation behavior when aligned along the pyramidal plane, the {10 (1) over tilde2} plane, or the {10 (1) over bar2} <(1) over bar 011 > twin boundary. For these cases, local crack-tip plasticity and crack-tip reconstructions are found to play significant roles. The impact of strain rate on the crack-tip behavior of a basal crack was also investigated in detail. Five strain rates varied between 10(9) s(-1) and 10(10) s(-1) were considered. With increased strain rates, a brittle-to-ductile transition was clearly observed for crack propagation. The desired transition can be attributed to the high stress and energy concentrations near the crack-tip under elevated strain rates, leading to the successive emission and propagation of partial dislocations. To verify and validate the simulation results, a theoretical analysis on the competition between brittle and ductile crack propagations was also implemented. The theoretical predictions based on the linear elastic fracture mechanics were found to reasonably agree with the simulation results. The observations and conclusions deduced from the combined modeling and theoretical study are helpful to the better understanding of fracture mechanics in nanocrystalline titanium.

Atomistic Simulation of Structure Evolution at a Crack Tip in Bcc-Iron

Atomistic Simulation of Stress-Induced Phase Transformation and Recrystallization at the Crack Tip in Bcc Iron

Atomistic Simulation of Crack Propagation and Its Size-Dependent Behavior

Atomistic simulation of crack cleavage and blunting in bcc-Fe

Atomistic Simulation of Martensitic Phase Transformation at the Crack Tip in B2 NiAl

Asymmetrical propagation mechanism of the crack in bcc iron

Atomistic Scale Behaviors of Crack Propagation in Nanocrystalline Bcc Iron

Molecular Dynamics Simulation on Intergranular Crack Propagation Along ∑3 Tilt Grain Boundary in Bcc Iron

Molecular Dynamics Simulation of Brittle Fracture in Bcc Iron

Mechanisms of Martensitic Phase Transformations in Body-Centered Cubic Structural Metals and Alloys: Molecular Dynamics Simulations

Effects of Crystalline Orientation, Twin Boundary and Stacking Fault on the Crack-Tip Behavior of a Mode I Crack in Nanocrystalline Titanium

Combined atomistic simulation and continuum mechanics: Size-dependent behavior of atomistic simulation for brittle fracture in bcc-iron

The Effect of Stacking Faults or Twin Formation on Crack Propagation in Bcc Iron

Toughening alpha-Ti by dislocation-induced phase transformation at crack tips

Molecular Dynamics Simulation of Fatigue Crack Propagation in Bcc Iron under Cyclic Loading

Atomistic Simulation of Crack Propagation in Single Crystal Tungsten under Cyclic Loading

Atomic simulation of the orientation effects on crack tip behavior in titanium single crystal

Atomistic Simulation of Deformation Behavior at a Crack Tip in Magnesium Single Crystal

Investigation of Crack Propagation in Iron at Low Temperature by FEAt Method

Atomistic simulations of twin boundary effect on the crack growth behaviour in BCC Fe

Modelling of the evolution of crack of nanoscale in iron