Abstract:Efficient coupling of mechanical properties of SWNTs with the matrix leading to the transfer of unique mechanical properties of SWNTs to the macroscopic composites is a tremendous challenge of today's materials science. The typical mechanical properties of known SWNT composites, such as strength, stiffness, and toughness, are assessed in an introductory survey where we focused on concrete numerical parameters characterizing mechanical properties. Obtaining ideal stress transfer will require fine optimization of nanotube-polymer interface. SWNT nanocomposites were made here by layer-by-layer (LBL) assembly with poly(vinyl alcohol) (PVA), and the first example of optimization in respect to key parameters determining the connectivity at the graphene-polymer interface, namely, degree of SWNT oxidation and cross-linking chemistry, was demonstrated. The resulting SWNT-PVA composites demonstrated tensile strength (σ(ult)) = 504.5 ± 67.3 MPa, stiffness (E) = 15.6 ± 3.8 GPa, and toughness (K) = 121.2 ± 19.2 J/g with maximum values recorded at σ(ult) = 600.1 MPa, E = 20.6 GPa, and K = 152.1 J/g. This represents the strongest and stiffest nonfibrous SWNT composites made to date outperforming other bulk composites by 2-10 times. Its high performance is attributed to both high nanotube content and efficient stress transfer. The resulting LBL composite is also one of the toughest in this category of materials and exceeding the toughness of Kevlar by 3-fold. Our observation suggests that the strengthening and toughening mechanism originates from the synergistic combination of high degree of SWNT exfoliation, efficient SWNT-PVA binding, crack surface roughening, and fairly efficient distribution of local stress over the SWNT network. The need for a multiscale approach in designing SWNT composites is advocated.

Direct Synthesis of a Macroscale Single‐Walled Carbon Nanotube Non‐Woven Material

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Directly synthesized strong, highly conducting, transparent single-walled carbon nanotube films.

High performance, freestanding and superthin carbon nanotube/epoxy nanocomposite films.

Synthesis and physical properties of macroscale carbon nanotube architectures

Multiparameter Structural Optimization of Single-Walled Carbon Nanotube Composites: Toward Record Strength, Stiffness, and Toughness

Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers

Direct Growth of Macroscopic Fibers Composed of Large Diameter SWNTs by CVD

Development of Microsturcture Based on Single-Wall Carbon Nanotube.

Fabricating Ultrastrong Carbon Nanotube Fibers via a Microwave Welding Interface

Super‐Toughness Carbon Nanotube Yarns by Bio‐Inspired Nano‐Coiling Engineering

Co-synthesis of Single-Walled Carbon Nanotubes and Carbon Fibers

High-strength laminated copper matrix nanocomposites developed from a singlea walled carbon nanotube film with continuous reticulate architecture

Large-Scale Fabrication of Suspended, Aligned, and Strained Single Walled Carbon Nanotube Networks

Manipulation of Ultralong Single-Walled Carbon Nanotubes at Macroscale

Direct Synthesis of High Purity Single-Walled Carbon Nanotube Fibers by Arc Discharge

In-Situ Welding Carbon Nanotubes into a Porous Solid with Super-High Compressive Strength and Fatigue Resistance

Microfabrication Of Single-Wall Carbon Nanotube One-Dimensional Unit

Low-Temperature, Directly Depositing Individual Single-Walled Carbon Nanotubes for Fabrication of Suspended Nanotube Devices

Multifunctional Macroarchitectures of Double-Walled Carbon Nanotube Fibers