Abstract:Scintillating fibre detectors combine sub-mm resolution particle tracking, precise measurements of the particle stopping power and sub-ns time resolution. Typically, fibres are read out with silicon photomultipliers (SiPM). Hence, if fibres with a few hundred m diameter are used, either they are grouped together and coupled with a single SiPM, losing spatial resolution, or a very large number of electronic channels is required. In this article we propose and provide a first demonstration of a novel configuration which allows each individual scintillating fibre to be read out regardless of the size of its diameter, by imaging them with Single-Photon Avalanche Diode (SPAD) array sensors. Differently from SiPMs, SPAD array sensors provide single-photon detection with single-pixel spatial resolution. In addition, O(us) or faster coincidence of detected photons allows to obtain noise-free images. Such a concept can be particularly advantageous if adopted as a neutrino active target, where scintillating fibres alternated along orthogonal directions can provide isotropic, high-resolution tracking in a dense material and reconstruct the kinematics of low-momentum protons (down to 150 MeV/c), crucial for an accurate characterisation of the neutrino-nucleus cross section. In this work the tracking capabilities of a bundle of scintillating fibres coupled to SwissSPAD2 is demonstrated. The impact of such detector configuration in GeV-neutrino experiments is studied with simulations and reported. Finally, future plans, including the development of a new SPAD array sensor optimised for neutrino detection, are discussed.

Beam test of a 12-layer scintillating-fiber charged-particle tracking system

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

Development of scintillating fiber detector technology for high rate particle tracking

Development of fiber beam loss monitor based on Cerenkov principle

SciFi: A large Scintillating Fibre Tracker for LHCb

A 1 mm Scintillating Fibre Tracker Readout by a Multi-anode Photomultiplier

The design, construction and performance of the MICE scintillating fibre trackers

Beam Tests of Lead Tungstate Crystal Matrices and A Silicon Strip Preshower Detector for the Cms Electromagnetic Calorimeter

Plastic scintillator fiber detectors for heavy ion trajectory reconstruction for the Super-FRS at FAIR

Demonstration of particle tracking with scintillating fibres read out by a SPAD array sensor and application as a neutrino active target

Beam test results of 3D fine-grained scintillator detector prototype for a T2K ND280 neutrino active target

Cms Resistive Plate Chamber Overview, from the Present System to the Upgrade Phase I

Beam extraction studies at 900 GeV using a channeling crystal

Beam Test Results of the US-CMS Forward Pixel Detector

Scintillation Light in SBND: Simulation, Reconstruction, and Expected Performance of the Photon Detection System

Performance of Scintillator Counters with Silicon Photomultiplier Readout

Exposing a fibre-based dual-readout calorimeter to a positron beam

Tests of a dual-readout fiber calorimeter with SiPM light sensors

A Time Projection Chamber with GEM-based Readout

An Optimized Prototype Of Electromagnetic Calorimeter For The Solid Project At Jefferson Lab