Abstract:Forward I-V measurement is an important method used to test the quality of power diodes. Diode with excessive V/sub F/ can be due to either defects in wafer fabrication or soldering processes. However, it is difficult to isolate either of the causes of failure when a diode is found to have high V/sub F/. We first examine the conventional /spl Delta/V/sub F/ measurement method used for detecting poor quality of solder for power diode in industry, and find that the method is ineffective if the poor quality of solder is not in the form of voids in solder, but rather a change of solder shape due to contamination or solder material properties. Then, a new method is reported to accurately measure the series resistance determined from a simple standard forward I-V measurement. The importance of the new method is that, without extra measurement and opening the package, one can identify if the cause of high VF failure is due to poor solder or the dice itself. One can also determine the true forward I-V curve of a power diode dice and use the true V/sub F/ of the dice as a quality control parameter to check for wafer diffusion quality, and use the series resistance of solder plus lead-frame as a quality control parameter to check for process integrity. Finally, it is demonstrated that the method could be applied to determine the solder coverage/abnormal shape for actual power diode. This result, coupled with the standard /spl Delta/V/sub F/ method, also enables us to identify units with poor solder quality.

The Study of Handling Experiment Data in Nonlinear Volt-ampere Experiment

Current-voltage Characteristics and Parameter Retrieval of Semiconducting Nanowires

Improving the Ability of Independent Analysis in Electric Circuit Experiment Teaching

Nonlinear Resistance Characteristics Experimental Research

New Useful Information from Simple Forward I-V Measurement of a Power Diode

Study on the Extraction of PN Diode Parametersfrom Forward I-V Characteristics

Diode Parameter Extraction by a Linear Cofactor Difference Operation Method

Measurements and analysis of current-voltage characteristic of a pn diode for an undergraduate physics laboratory

A New Method of Accurate Electrical Characterization of Semiconductor Diodes at Forward Bias

Understanding the electrical performance of nonlinear materials in strongly inhomogeneous electric field

A study on dimensional effect of ZnO varistors by means of statistics

Accurate Electrical Characterization of Forward AC Behavior of Real Semiconductor Diode: Giant Negative Capacitance and Nonlinear Interfacial Layer

Investigation on the Response of ZnO/SiR Composites under Impulse Voltage

Study of the Relationship Between the V-I Curve and the Flux Dynamics in Superconductors

Investigation of Device Geometry- and Temperature-Dependent Characteristics of Algan/Gan Lateral Field-Effect Rectifier

Experimental Investigation for Switching Characteristics of SiC Based Voltage-Reverse-Blocking Devices in Current-Source-Inverter

An experiment to profile the voltage, current and temperature behaviour of a P–N diode

Simulation and Experiment on Discharge Characteristics of Indoor Devices in ±1100 Kv Converter Station Based on Potential Gradient Equivalent Method

Experiment of temperature characteristics of PN junction

Experimental Study on Unidirectional Flow Characteristics of Flow Diode

Nonlinear Inductive Characteristics of Metal Oxide Varistors