Abstract:The removal of p-nitrophenol (PNP) from wastewater was evaluated by the activated persulfate process using different materials - carbon xerogels (XG), carbon nanotubes (CNT), and activated carbon (AC) -, and also using such materials doped with nitrogen (XGM, CNTM and ACM). These carbon materials were impregnated with 2 wt.% of iron and tested in the oxidative process to assess the influence of their textural and surface chemical properties. The carbon-based materials' properties influence the efficiencies of the adsorption and oxidative processes; in adsorption, the materials with higher specific surface areas (SBET), i.e. AC (824 m2/g) and Fe/AC (807 m2/g), have shown to be the most promising (having achieved a PNP removal of about 20%); on the other hand, in the activated persulfate process the carbon or iron-containing carbon materials with the highest mesoporous areas (Smeso) were the preferential ones - XG and Fe/XG, respectively - reaching removals of 47.3% and 75.7% for PNP and 44.9 and 63.3% for TOC, respectively. Moreover, the presence of nitrogen groups on the samples' surface benefits both processes, being found that PNP degradation and mineralization increase with the nitrogen content. The stability of the best materials (XGM and Fe/XGM) was evaluated during four cycles, being noticed that while XGM lost catalytic activity, the Fe/XGM sample remained stable without leaching of iron. The quantification of intermediate compounds formed during persulfate oxidation was performed, and only oxalic acid was detected, in addition to PNP, being that their contribution to the TOC measured was higher than 99%. Experiments carried out in the presence of radical scavengers proved that only the sulfate radical is present under the acidic conditions used. Complete PNP oxidation and TOC removal of ∼96% were reached for the activated persulfate process, proving to be more attractive than the Fenton one.

Treatment of p-Nitrophenol Production Wastewater by Activated Carbon Fiber Adsorption

Adsorption of p-nitrophenol from wastewater by activated carbon fiber and its desorption

Adsorption of P-Nitrophenol from Aqueous Solutions Onto Activated Carbon Fiber

P-Nitrophenol Abatement by the Combination of Electrocatalysis and Activated Carbon

The Role of Activated Carbon on the Removal of P-Nitrophenol in an Integrated Three-Phase Electrochemical Reactor.

Synergetic Effects for P-Nitrophenol Abatement Using a Combinedactivated Carbon Adsorption-Electrooxidation Process

Electrochemical regeneration of activated carbon loaded with p-nitrophenol in a fluidized electrochemical reactor

Adsorption Behavior of p-Nitrophenol from Water onto Activated Carbon Fiber

Ozonation of Activated Carbon Fibers Loaded with P-Nitrophenol

Degradation Of Aqueous P-Nitrophenol By Ozonation Integrated With Activated Carbon

Treatment of Wastewater from the Production Process of P-Aminobenzoic Acid with Polymeric Adsorbents

Feasible treatment of epoxy methyl ester wastewater using activated carbon as an adsorbent

Simultaneous Regeneration of P-Nitrophenol-saturated Activated Carbon Fiber and Mineralization of Desorbed Pollutants by Electro-Peroxone Process

Preparation Of Catalytic Activated Carbon Fiber And Its Catalytic Oxidation Performance To 4-Nitrophenol

Catalytic Degradation of 4-Nitrophenol by Activated Carbon Fiber Supported Iron Tetrasulfophthalocyanine

Enhanced Degradation of Nitrophenol in Ozonation Integrated Plasma Modified Activated Carbons

Treatment of p-Aminophenol Wastewater by Resin Adsorption Process

STUDY ON BIOTREATMENT OF P-NITROPHENOL WITH MICRO-ELECTROLYSIS AS PRETREATMENT

Super facile one-step synthesis of aromatic amine waste residue derived N-rich porous carbon for hyper efficient p-nitrophenol adsorption

Degradation of p-Nitrophenol by activated persulfate with carbon-based materials

Ozonation of P-Nitrophenol Adsorbed on Activated Carbon Fiber (acf) and the Change of Textural and Chemical Characteristics of Acf