Abstract:A modified nano-calcium carbonate (R-CCR) was prepared by coating a layer of unsaturated hydroxylfatty acid on the surface of CCR powders using a solid state method; the latter were commercial nano-CaCO 3 modified with stearic acid. FTIR studies indicate that the modifier is combined on the surface of CaCO 3 . PP/EPDM/nano-CaCO 3 ternary composites were prepared by a melt-mixing method. SEM and TEM were utilized to examine the morphology of the composites. The tensile fractured surface of PP/EPDM/R-CCR showed a fibroid morphology and large-scale yield deformation. The impact fractured surface showed that the amount of cavities in the PP/EPDM/R-CCR system was increased, however their size diminished obviously. R-CCR particles were dispersed uniformly in the PP matrix, and their compatibility was distinctly improved as compared to CCR when the amount of R-CCR was 15 h −1 . The tensile strength remained nearly constant (reduced from 27.6 MPa to 27.5 MPa), while the impact strength increased from 9.6 kJ/m 2 to 15.4 kJ/m 2 as CCR was replaced by R-CCR. Meanwhile, the bending strength and bending modulus also increased correspondingly. Furthermore, the impact strength of PP/EPDM/R-CCR was maintained at a high level (15.4 kJ/m 2 ), which was more than the sum of that of PP/EPDM and PP/R-CCR (6.6 kJ/m 2 and 6.1 kJ/m 2 respectively). This indicates that the R-CCR and EPDM have a significant synergistic toughening effect on PP while maintaining the strength and modulus of virgin PP. Both the storage modulus G′ and loss modulus G″ of PP/EPDM and PP/EPDM/R-CCR composites increase with increasing frequency, but the values of G′ and G″ of the tertiary composite are relatively higher than those of the binary system. The loss factor and viscosity decrease with increasing frequency, but there is little difference between tertiary and binary composites. The apparent viscosity η of the tertiary system containing R-CCR is lower than that of the tertiary system containing CCR and virgin PP. The viscosity of the composites sig-nificantly decreases with increasing shear rate. The mea-sured mechanical properties of the composites indicate that replacing CCR with R-CCR for binary composites could simultaneously enhance the toughness and strength of PP.

Morphology Prediction of Ternary Polypropylene Composites Containing Elastomer and Calcium Carbonate Nanoparticles Filler

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Influences of Ternary Graft Copolymers on the Morphology and Properties of Polypropylene/Calcium Carbonate Composites

Influence of Morphology on the Mechanical Properties of Polymer Nanocomposites Filled with Uniform or Patchy Nanoparticles.

PP/elastomer/calcium carbonate composites: effect of elastomer and calcium carbonate contents on the deformation and impact behavior

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Toughness Mechanism of Polypropylene/elastomer/filler Composites

A Study of Internal Friction in Polypropylene (PP) Filled with Nanometer-Scale CaCO3 Particles

Polycarbonate/Polypropylene/Fibrillar Silicate Ternary Nanocomposites: Morphology and Mechanical Properties

Effect of Unsaturated Hydroxyl-Fatty Acid Modified Nano-Caco3 on the Morphological and Rheological Behavior of PP

Effect of Fibrillar Morphology on Elastomer‐modified Polypropylene

Morphology and energy storage properties of nano-ZrO<inf>2</inf>/Polypropylene composite

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Investigations on Nano-CaCO3 Reinforced and Toughening Polypropylene/Elastomer Composites

Experimental Measurements and Modeling of Solubility and Diffusivity of Co2 in Polypropylene/Micro- and Nanocalcium Carbonate Composites

Preparation and linear rheological behavior of polypropylene/MMT nanocomposites

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Droplet Bridging Effect in Polymer/Polymer/Filler Ternary Composites

Mechanical Properties and Morphology of Poly(L-Lactic Acid)/Nano-Caco3 Composites