Abstract:Abstract Metal-dielectric-metal (MIM) waveguide coupling systems based on surface plasmon polaritons (SPPs) are designed and studied. The finite element method is used to simulate the transmission spectra of structures in the whole simulation process. One waveguide coupling system consists of an inverted T-shaped cavity with defect (ITD) and a waveguide with a metal wall. The filter band appears in the transmission spectrum due to the opposite direction of two Fano resonances. The filter band width and the filtering range can be tuned effectively by changing the structure parameters. In this system, the center frequency and bandwidth of the filter band are 1330 nm and 114 nm, respectively. The insertion loss and reflection loss are −1.41 dB and −16.89 dB, respectively. The optimization is carried out on the basis of the first system in order to improve the filtering performance. Optimized waveguide coupling system contains an ITD and a waveguide with a slot cavity. Electromagnetically induced transparency (EIT) and Fano resonance exist simultaneously, and the filter band is induced in the transmission spectrum. In this system, the center frequency and bandwidth of the filter band are 1412 nm and 120 nm, respectively. The insertion loss and reflection loss are −0.50 dB and −37.32 dB, respectively. EIT and Fano resonance can not only be regulated independently, but also be regulated simultaneously by changing the structural parameters. And the intensity of EIT and the width of the filter band can be manipulated with changes of the structural parameters. The transmission response of SPPs propagating in the structure can be adjusted dynamically. Moreover, these novel SPPs optical waveguide structures have good filtering efficiency and can meet different filtering needs. These results show that the proposed systems are promising for filter, slow light device and photonic device integration applications.

Impedance Matching Induce High Transmission and Flat Response Band-Pass Plasmonic Waveguides

General Guided-Wave Impedance-Matching Networks with Waveguide-Metamaterial Elements

Optical Performance Of Single-Mode Hybrid Dielectric-Loaded Plasmonic Waveguide-Based Components

Impedance Calculation and Equivalent Circuits for Metal-Insulator-metal Plasmonic Waveguide Geometries.

A Wedge-to-wedge Plasmonic Waveguide for Subwavelength Confinement and Long-Range Propagation

Band-stop filter based on tunable Fano resonance and electromagnetically induced transparency in metal-dielectric-metal waveguide coupling systems

Band Rejection Filter Based on A Composite Spoof Surface Plasmon Periodic Structure

Multi-Resonant Plasmonic Transmission in a Dual-Periodically Arranged Metal-Insulator-Metal Waveguide

Broadband Coupler Between Silicon Waveguide and Hybrid Plasmonic Waveguide

Plasmonic reflectors and high-Q nano-cavities based on coupled metal-insulator-metal waveguides

Turning plasmonic wave transmission and reflection with nanocircuit loads in plasmonic circuitry

High performances of planar hybrid plasmonic waveguidebased structures

Nonreciprocal Magneto-Plasmonic Waveguide with Compact Metal-Sandwiched Structure

Flat-Top Reflection Characteristics in Metal-Dielectric-Metal Plasmonic Waveguide Structure Side Coupled with Cascaded Double Cavities

Characterization of Planar Hybrid Dielectric-Loaded Plasmonic Nano-Waveguides Used for Nano-Photonic Circuits

Structurally-tolerant Vertical Directional Coupling Between Metal-Insulator-metal Plasmonic Waveguide and Silicon Dielectric Waveguide

Investigation of the transmission properties of a plasmonic MIM waveguide coupled with two ring resonators

Asymmetric Plasmonic-Dielectric Coupler with Short Coupling Length, High Extinction Ratio, and Low Insertion Loss.

Surface Plasmon Polariton Mode in the Metal-Insulator-metal Waveguide

Unidirectional Optical Coupling for Plasmonic Waveguide Based on Metallic-Dielectric High Contrast Gratings

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits