Abstract:The divinyl silane modified self-crosslinking polyacrylate latex was successfully prepared by semicontinuous seeded emulsion polymerization. Methyl methacrylate (MMA) and butyl acrylate (BA) were used as main monomers and the reaction was initiated by potassium persulfate (KPS). The modified monomer 1, 3-divinyltetramethyldisiloxane (DVMS) and crosslinked monomer hydroxyethyl acrylate (HEA) were introduced into the basic dispersion. Sodium dodecyl sulfonate (SDS) anionic surfactant and alkyl polyglycoside (APG) nonionic emulsifier were utilized as composite emulsifiers. The structure of latex film was characterized by Fourier transform infrared spectroscopy (FTIR). The latex films were tested by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA) and apparent crosslinking percentage. The particle size of the emulsion was measured by Zetatrac dynamic light scattering instrument. The optimum conditions are as follows: the amount of composite emulsifier is 5.0%, the mass ratio of SDS to APG is 1:1, the amount of initiator is 0.5%, the amount of DVMS is 5.0%, and the amount of HEA is 1.0%. The emulsion has good mechanical stability and chemical stability, and the storage stability is ideal. The dispersion is blue and translucent, with a small particle size. The apparent crosslinking percentage of the latex film is above 89%, and the highest contact angle was more than 98°. The polyacrylate colloidal film prepared in this paper has outstanding thermal stability and hydrophobicity.

Preparation and Properties of the Self-Crosslinked Acrylic Rubber Via Gamma Ray Initiated Emulsion Polymerization

Polybutadiene Vitrimers with Tunable Epoxy Ratios: Preparation and Properties

Preparation and Characterization of Self-crosslinked Acrylate Emulsified with Environmentally Friendly Surfactants

Synthesis and Characterization of Self-cross Linking Hybrid Silicone-acrylate Emulsion at Ambient Temperature

Preparation and properties of ambient self-crosslinking acrylic emulsion

A Comparison of Properties Between Carboxylated Acrylic Rubbers Prepared by Γ-Ray Irradiation and Chemical Method

Effect of Carboxyl on Vulcanization and Mechanical Properties of Carboxylated Acrylic Rubber Prepared by 60co‐γ‐ray‐induced Polymerization

Synthesis and Characterization of Carboxyl-containing Acrylate Rubber

Preparation and Characterization of Crosslinking Polyacrylate Latex Prepared by Soap-Free Emulsion Polymerization

Preparation and characterization of self-crosslinking acrylate emulsion modified by divinyl silane

Study on the self-crosslinking behavior based on polychloroprene rubber and epoxidized natural rubber

Preparation of low‐temperature self‐crosslinking acrylic resin and its performance research

Advance in acrylate rubber synthesized via emulsion polymerization

Design and Preparation of Cross‐linked Α‐methylstyrene Acrylonitrile Copolymer Nanoparticles and Their Interfacial Investigation with Rubber

Synthesis and Properties of Fluorine-Containing Acrylic Rubber

Structure, Property Optimization, and Adsorption Properties of N,N'-methylenebisacrylamide Cross-Linked Polyacrylic Acid Hydrogels under Different Curing Conditions

Preparation of Crosslinked Nanospheres of α-Methyl Styrene and Acrylonitrile Copolymer and Investigation of Interfacial Interaction between Nanospheres and Rubber

Synthesis and characterization of acrylic rubber

The Importance of Bulk Viscoelastic Properties in "Self-Healing" of Acrylate-Based Copolymer Materials

Influence of Prolonging Vulcanization on the Structure and Properties of Hard Rubber

Investigation of the Mechanical Properties of a Pressure-sensitive Adhesive Part 4 Crosslink Dependence of Molecular Weight Distribution of Sol Fraction of Lightly-crosslinked Acrylic Copolymers