Abstract:Natural rubber is a widely used elastomer for the preparation of cyclically mechanically loaded products such as tires, where it reduces self-heating behavior. From a material point of view, the degree of self-heating depends on the composition of the rubber compound. One of the parameters influencing the self-heating of rubber is the type of curing system, which leads to different crosslinking density. The crosslinking density value for carbon black filled rubbers is only apparent due to the its physical interactions present and is referred to as the apparent crosslinking density (aCLD).Therefore, this work focuses on investigating the effect of sulfur intermolecular network formation by conventional (CV), semi-efficient (SEV) and efficient (EV) curing systems on the temperature development of cyclically loaded rubber using an advanced test method to in-situ determine the heat build-up. Rubber samples based on different curing systems were prepared by varying the concentration of the accelerator N-Tertiarybutyl-2-benzothiazole sulfenamide (TBBS) at a constant concentration of sulfur (2.5 phr). Using basic mechanical tests, it was found that the stiffness and hardness of the rubber increased with increasing aCLD and decreasing proportion of poly-sulfide bonds, respectively. Furthermore, cyclic mechanical analysis showed that with increasing aCLD and parallel decrease in the proportion of poly-sulfide bonds, both the loss modulus ( G'' ) and dissipated strain energy increased, which was also reflected in the values of the mechanical stress-induced self-heating gradient. From the values of maximum developed temperatures, it was evident that the group of material with CV curing system showed the lowest self-heat build-up.

Effects of Bound Acrylonitrile Content on Thermal Degradation Behavior of Nitrile Rubber/carbon Black Vulcanizates

Factors Influencing Thermal Degradation of NBR

Effect of AN Content on Vulcanization Reaction of NBR Compounds

Effect of Crosslink Structures on Dynamic Mechanical Properties of Natural Rubber Vulcanizates under Different Aging Conditions

Significant Influence of Bound Rubber Thickness on the Rubber Reinforcement Effect

Effect of non-rubber components on the crosslinking structure and thermo-oxidative degradation of natural rubber

Effect Of Thermo-Oxidative Aging On Mechanical Properties And Tribological Behaviors Of Acrylonitrile-Butadiene Rubber

Effect of Crosslink Structure on Mechanical Properties of Natural Rubber Vulcanizate under Different Aging Conditions

Investigation of Crosslinking in the Thermooxidative Aging of Nitrile–butadiene Rubber

Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Thermal-oxidative Degradation Behavior and Process of Vulcanized Styrene-Butadiene Rubber

Thermo-oxidative degradation behavior of natural rubber vulcanized by different curing systems

EFFECT OF HEATING ON STRUCTURAL PARAMETERS OF NITRILE BUTADIENE RUBBER IN THE PRESENCE OF CHLORINE-CONTAINING COMPOUNDS

Effect of ageing on NR vulcanizates

A Molecular Dynamics Simulation Study on Enhancement of Mechanical and Tribological Properties of Nitrile—Butadiene Rubber with Varied Contents of Acrylonitrile

Thermo-oxidative Degradation Behavior of Vulcanized Butadiene Rubber under Thermal Recycling Conditions

CHANGES OF CHEMICAL STRUCTURE AND MECHANICAL PROPERTY LEVELS DURING THERMO-OXIDATIVE AGING OF NBR

Tribological behaviour of acrylonitrile-butadiene rubber under thermal oxidation ageing

Effect of thermo-oxidative aging on the Payne effect and hysteresis loss of carbon-black filled rubber vulcanizates

The Effect of Apparent Density of Sulfidic Crosslink and Their Chemical Nature on Self-heat Build-up in Carbon Black Filled Natural Rubber under Cyclic Mechanical Loading

Effect of Carbon Black Nature on Vulcanization and Mechanical Properties of Rubber