Abstract:Refractive index is one of the most important physical parameters of the materials. Owe to its great influence on the working characteristics of an optical systems, high accuracy measurement is required. Many methods have been proposed such as the v-prism method, the minimum deviation angle method, and the interferometric method. However, for the restriction of the principle, the shape of the sample is required to be a parallel plate or a prism with a specific shape. The sample with only spherical or aspheric surfaces cannot be tested. In this paper, an improved Brewster method is proposed to measure the refractive index of optical materials with arbitrary shapes. Brewster law can be expressed as that the reflectivity of the P-polarized light approaches zero when it is incident in the Brewster angle, which is the inverse trigonometric value of the refractive index. In the original method, a parallel laser beam with P polarization is incident on the sample, and reflected by it to a photodiode to get the intensity. The minimum intensity position corresponding to Brewster angle can be found by changing the incident angle. The reflecting surface of the sample need to be planar to provide smooth reflective area with a size greater than the beam diameter. In the improved method, a laser probe focusing on the sample and an array detector are used instead of the parallel beam and the photodiode. The minimum intensity position can be found with image processing technology. Since the laser beam is focused on the sample, only a tiny area with a size of 10 microns for reflection is needed. Thus, whatever the shape of the sample is, the method can be used. In order to demonstrate the feasibility, samples with different shapes such as a prism, a parallel plate and a lens was tested, and the accuracy of the results could all reach the order of magnitude of 10(-3).

The Measurement and Calculation of the Refractive Index Change of Azo-dye Doped Polymer

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

THE THERMAL OPTICAL PROPERTIES OF POLY (METHYL METHACRYLATE) SOLID FILMS DOPED BY AZO DYES

Effective indexes of refraction and limiting properties of ethyl red

Applicability of the Focusing Method to Measure the Refractive Index Profile of Polymer Optical Fibers

The Refractive Index Measurement of Polymer Films with Ellipsometry

A Method for Measuring the Continuous Dispersion Spectrum of Nonlinear Refraction Coefficients of Materials

A Method for Determining the Complex Refractive Index Dispersion of Absorbing Materials Without Thickness Information

Measurement of Electrically Induced Change in Complex Refractive Index of Nonlinear Polymer by Improved Attenuated-Total-reflection Technique

Nonlinear Refraction and Photoinduced Birefringence in the Methyl-Red-Doped Polymer Thin Film

Measurement of nonlinear refractive index of ethyl red by interference of capillary

Facile Z-scan determination of nonlinear refractive index and absorption coefficient of dye-doped polymer film

Refractive Index and Dispersion Measurement Principle with Polarization Change in Total Internal Reflection

Measurement for Refractive Index Distribution of Polymer Optical Fiber Based on Microscopic Image

Nonlinear optical properties of methyl red under CW irradiation

Photoinduced Birefringence in an Azo-Dye-doped Polymer

Measurement of Refractive Index of Optical Materials Using Improved Brewster Method

A METHOD TO CALCULATE THE REFRACTIVE INDEX OF TERNARY INORGANIC SOLUTION

Optical Parameters And Absorption Of Azo Dye And Its Metal-Substituted Compound Thin Films

Influences on Inscription Rates of Surface Relief Gratings - Ii. Methyl Substituent Effect of Azo Chromophores