Abstract:Task-constrained motion planning (TCMP) is involved in many practical applications, such as opening the door, opening the drawer, twisting the screw, and so on. Because of the trend of man-machine collaboration and the existence of dynamic in environments, planning the collision-free motions for task-constrained manipulation is a significative problem. This paper explores the TCMP issue for mobile manipulation, which uses a mobile base to enhance the working range and flexibility but simultaneously makes the problem harder than that of single manipulation because of the additional degrees of freedom (dofs). We propose an optimization-based method to plan the obstacle avoidance motion in real-time. First, the global robotic Jacobian matrix that combines the omnidirectional base and the robotic arm is derived. Second, model predictive control is used to plan the control rule in order to maximize the closest distance between the obstacles and the mobile manipulator and minimize the velocities of null space at the same time. We have deduced the model with four differential equations that represent the law of the distance over time. Third, the distances are calculated and sent to the model to calculate the velocity of each joint of the arm and the base using ACADO that is an open-source toolkit. Using the velocities, the mobile manipulator can move away from the approaching people while still fixing the end of the arm to manipulate tool at the same time. Our method is verified on the mobile manipulator that consists of four Mecanum wheels, a base, a UR10 arm, and four kinect cameras in Gazebo simulation with using the ROS operation.

Acceleration-Level Cyclic-Motion Generation of Constrained Redundant Robots Tracking Different Paths

Real-time Generation of a Continuous Acceleration Trajectory for Mobile Robots

Learning Accurate and Robust Velocity Tracking for Quadrupedal Robots

Balance maintenance in high-speed motion of humanoid robot arm-based on the 6D constraints of momentum change rate.

Cyclic motion generation of multi-link planar robot performing square end-effector trajectory analyzed via gradient-descent and Zhang et al’s neural-dynamic methods

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

A Spatial Path Following Method for Hyper-Redundant Manipulators by Step-by-Step Search and Calculating

Jerk-bounded and -Continuous Trajectory Planning for a 6-DOF Serial Robot Manipulator with Revolute Joints

An Iterative Path-Following Method for Hyper-Redundant Snake-Like Manipulator with Joint Limits.

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Hybrid Orientation and Position Collaborative Motion Generation Scheme for a Multiple Mobile Redundant Manipulator System Synthesized by a Recurrent Neural Network

A Kinematics Control Scheme of Redundant Manipulators Under Unknown Loads or External Forces

Kinematic and Dynamic Models of Hyper-Redundant Manipulator Based on Link Eigenvectors

Concentric Tube Robot Redundancy Resolution via Velocity/Compliance Manipulability Optimization

A Pseudo-Inverse Redundancy-Based Resolution Scheme at the Acceleration Level to Control Robotic Arm Motion

Dynamic modeling and trajectory tracking control method of segmented linkage cable-driven hyper-redundant robot

Two model-free schemes for solving kinematic tracking control of redundant manipulators using CMAC networks

Time-Optimal Asymmetric S-Curve Trajectory Planning of Redundant Manipulators under Kinematic Constraints

A new discrete-time repetitive motion planning scheme based on pseudoinverse formulation for redundant robot manipulators with joint constrains

Two trajectory tracking control methods for space hyper-redundant cable-driven robots considering model uncertainty

An approach for jerk-continuous trajectory generation of robotic manipulators with kinematical constraints