Abstract:Highlights • Devise a MLKC scheme for the model-less control of redundant robot manipulators. • Handle joint-physical-limit and joint-angular-drift problems simultaneously. • Present a Jacobian estimator designed based on zeroing dynamics. • Develop a discrete-time version of the MLKC scheme to facilitate the deployment of the control system. Model-free tracking control methods have been developed for redundant robotic manipulators with unknown kinematic or dynamic models. However, most existing works have not considered the problems of joint physical limits and joint angular drift. Joint angular drift refers to the phenomenon that the joint angles of a redundant manipulator are different from their initial state when the end-effector of the manipulator returns to its initial position. Therefore, this article proposes a model-free scheme for the tracking control of redundant manipulators as well as the avoidance of joint physical limits and joint angular drift. The proposed method aims to overcome these challenges by formulating the inverse kinematics problem as a constrained optimization problem, which incorporates the avoidance of joint angular drift into the optimization objective and takes the joint physical limits as a constraint. At the same time, an online Jacobian estimator is designed to observe the state of the manipulator. Specifically, it can estimate the Jacobian matrix of a redundant manipulator in real-time during the operation by fully exploiting the sensory data, without knowing the analytic robot model. Then, the optimization problem is integrated with the Jacobian estimator and solved by a discrete-time algorithm. Theoretical analysis is conducted to prove the stability and convergence of the proposed method. Moreover, the efficacy, practicability and superiority of the proposed method are supported by simulations and experiments based on different redundant manipulators.

Two model-free schemes for solving kinematic tracking control of redundant manipulators using CMAC networks

A Cerebellum-Inspired Network Model and Learning Approaches for Solving Kinematic Tracking Control of Redundant Manipulators

A Data-Driven Cyclic-Motion Generation Scheme for Kinematic Control of Redundant Manipulators

Redundant Robot Kinematics Control with HCMAC Neural Network Manipulability Enhancement

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

A Cerebellum-Inspired Control Scheme for Kinematic Control of Redundant Manipulators

Model-free kinematic control of redundant manipulators with simultaneous joint-physical-limit and joint-angular-drift handling

Cerebellum-Inspired Learning and Control Scheme for Redundant Manipulators at Joint Velocity Level

Data-Driven Model Predictive Control for Redundant Manipulators with Unknown Model

Cerebellum-Inspired Model Predictive Control for Redundant Manipulators with Unknown Structure Information

Comparative studies and performance analysis on neural-dynamics-driven control of redundant robot manipulators with unknown models

GLOBALLY STABLE TRACKING CONTROL OF ROBOT MANIPULATORS BASED ON CMAC DESIRED COMPENSATION

Kinematic Control of Redundant Manipulators Using Neural Networks

Finite-Time Model Predictive Tracking Control of Position and Orientation for Redundant Manipulators

Model-free Adaptive Dynamic Programming Based Near-optimal Decentralized Tracking Control of Reconfigurable Manipulators

Robot Manipulator Trajectory Tracking Control Based On Fwn And Cmac Network

Neural network-based model predictive tracking control of an uncertain robotic manipulator with input constraints

Unifying Obstacle Avoidance and Tracking Control of Redundant Manipulators Subject to Joint Constraints: A New Data-Driven Scheme

AN CMAC NETWORK MODEL AND ITS APPLICATION TO ROBOTIC CONTROL

Recurrent Neural Network for Kinematic Control of Redundant Robot Manipulators

Model-free Distributed Coordination Control for Dual-Arm Reconfigurable Manipulators with Handling Task Constraints