Abstract:It has long been found that the flow pattern of the liquid phase on distillation tray is of great importance on distillation process performance. But until now, there was very few published work on quantitative investigation of this subject. By combining the computational fluid dynamics (CFD) with the mass transfer equation, a theoretical model is proposed for predicting the details of velocity and concentration distributions as well as the tray efficiency of distillation tray column. Using the proposed model, four different cases corresponding to different assumptions of liquid and vapor flowing condition for a distillation tray column were investigated. In Case I, the distributions of velocity and concentration of the incoming liquid from the downcomer and the uprising vapor from the underneath tray spacing are uniform. In Case n, the distribution of the incoming liquid is non-uniform but the uprising vapor is uniform. In Case HI, the distribution of the incoming liquid is uniform but the uprising vapor is non-uniform. In Case IV, the distributions of both the incoming liquid and the uprising vapor are non-uniform. The details of velocity and concentration distributions on a multiple sieve tray distillation column in four different cases were simulated using the proposed model. It is found that the shape of the simulated concentration profiles of vapor and the liquid is quite different from case to case. The computed results also show that the tray efficiency is highly reduced by the maldistribution of velocity and concentration of the incoming liquid and uprising vapor. The tray efficiency for Case I is higher than Case Ⅱ or Case Ⅲ, and that for Case Ⅳ is the lowest. It also reveals that the accumulated effect of maldistribution becomes more pronounced when the number of column trays increased. The present study demonstrates that the use of computational method to predict the mass transfer efficiency for the tray column, especially for the large one, is feasible.

Thermal Analysis of Forward Feed Multi-Effect Distillation System

Numerical simulation analysis of a heat transfer tube in SuperORV

Thermodynamic analysis and performance assessment of different feed configurations for solar multi-effect distillation plant

Thermal-coupling-oriented integrated control and optimization of distillation process

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Heat and mass transfer analysis and optimization of passive interfacial solar still

Numerical simulation of single-effect thermal vapor-compression desalination system

Research on the Energy-Saving Efficiency of the Two-Effects System with Vapor Feed to Reboiler

Thermo-economic Analysis and Optimization of a Vacuum Multi-Effect Membrane Distillation System

Thermodynamic analysis of direct heated solar desalination system

Research on the Performance and Computational Fluid Dynamics Numerical Simulation of Plate Air Gap Membrane Distillation Module

Theoretical performance assessment of a multi-effect distillation system integrated with thermal vapour compression unit running on solar energy

A visual mass transfer study in the ejector considering phase change for multi-effect distillation with thermal vapour compression (MED-TVC) desalination system

Analysis of a multi-stage air gap diffusion distillation system powered by low-grade sensible heat

PERFORMANCE ANALYSIS OF A HORIZONTAL TUBE FALLING FILM EVAPORATION SOLAR DESALINATION UNIT WITH MULTI-EFFECT THERMAL REGENERATION

Exergy Analysis of Direct Contact Membrane Distillation under Different Operating Temperatures

Numerical Study on Flow and Heat Transfer Characteristics of Horizontal-tube Falling-film Evaporators in Seawater Desalination System

Mass Transfer Analysis of Air-Cooled Membrane Distillation Configuration for Desalination

Thermal Investigation and Performance Analysis of a Novel Evaporation System Based on a Humidification-Dehumidification Process

The Analysis of Distillation Tray Column Efficiency by Fluid Dynamics and Mass Transfer Computation

Mathematical modeling and optimal operation condition analysis of heat pump two-effect direct contact membrane distillation system