Abstract:The air-breathing engines, commonly known as Supersonic Combustor Ramjet (SCRAMJET) engines, are one of the most prominent technologies among researchers due to their high thrust-to-weight ratio. The researchers are constantly making efforts for improved performance of the combustor under the required boundary conditions. The present working computational model studies a hydrogen-fueled parallel cavity scramjet combustor to recognize the complex flow field characteristics and performance of the combustor in Ansys 15.0. The computational model developed is a replica of an experiment conducted in China which slightly modified the boundary conditions. The standard two-equation K- ε turbulence model and Reynolds averaged Navier Stokes (RANS) equation with finite-rate/eddy dissipation species reaction model are used to simulate the problem. The validation of the present model is achieved by comparing the results with already available experimental data in conformity with the literature. The results of the simulations are in satisfactory accord with the experimental data and images. Furthermore, to achieve the stated objective, different incoming Mach numbers, namely, 2.25, 2.52, and 2.75, are considered for a more clear understanding of variables that affects the characteristics of the flow field. The temperature, Mach number, density pressure, and H2O mass fraction contours were studied to facilitate proper understanding. The maximum temperature rise observed is 2711.467 K for M = 2.25. Additionally, the performance parameters, namely, combustion and mixing efficiencies, are also studied. The maximum combustion and mixing efficiencies are 87.47% and 98.15% for M = 2.25 and 2.75, respectively.

Numerical simulation of combustion chamber flow field for solid-liquid rocket ramjet

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

Numerical Simulation of Inner Flow Field of a Pintle Injector Variable Thrust Rocket Engine

Based on Fluent Numerical Calculation of Refractive Index on Rocket Engine Nozzle Plume

Simulation of Turbulent Combustion in DLR Scramjet

THREE-DIMENSIONAL NUMERICAL SIMULATION ON SPRAY COMBUSTION IN A LOX-HYDROGEN ENGINE

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Research on flow field characteristics of nozzle plume for a solid rocket motor

Flow Analyses of Integrated Liquid Fuel RAMJET Propulsion System

Numerical Simulation on Effects of Flight Parameters on Internal Flow of Jet Vector Nozzle

Numerical Simulation on Field Characteristics of the Horizontal Gas Jet Flow of Underwater Vehicle

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Numerical Simulation of Tail Flow Field of Four - Nozzle Solid Rocket Engine

Numerical Simulation of Wall Liquid Film in Small Bipropellant Rocket Engine

Numerical simulation of reacting flow and fuel regression rate in N 2O/htpb hybrid rocket motor

Numerical Investigation on Internal Regressing Shapes of Solid-Fuel Scramjet Combustor

Numerical Investigation on Cavity Length for Solid Fuel Scramjet

NUMERICAL SIMULATION OF A DUAL-COMBUSTIORSCRAMJET FLOW-FIELD

Numerical Study on the Unsteady Behavior of the Solid-Fuel Scramjet

Numerical Investigation on the Effect of Inflow Mach Numbers on the Combustion Characteristics of a Typical Cavity-Based Supersonic Combustor

Numerical Simulations and Optimization of a Micro Annular Combustor