Abstract:As shale gas recovery progresses to deep layers, the wellbore instability during drilling in applications of oil-based drilling fluids (OBFs) becomes increasingly severe. This research developed a plugging agent of nano-micron polymeric microspheres based on inverse emulsion polymerization. Through the single-factor analysis with respect to the permeability plugging apparatus (PPA) fluid loss of drilling fluids, the optimal synthesis conditions of polymeric microspheres (AMN) were determined. Specifically, the optimal synthesis conditions are as follows: the monomer ratio of 2-acrylamido-2-methylpropanesulfonic acid (AMPS): Acrylamide (AM): N-vinylpyrrolidone (NVP) were 2:3:5; the total monomer concentration was 30%; the concentrations and HLB values of emulsifier (Span 80: Tween 60) were 10% and 5.1, respectively; the oil–water ratio of the reaction system was 1:1; the cross-linker concentration was 0.4%. The polymeric microsphere (AMN) produced via the optimal synthesis formula had the corresponding functional groups and good thermal stability. The size distribution of AMN ranged mainly from 0.5 to 10 μm. The introduction of AMND in OBFs can increase the viscosity and yield point of oil-based drilling fluids and slightly decrease the demulsification voltage but significantly reduce high temperature and high pressure (HTHP) fluid loss and permeability plugging apparatus (PPA) fluid loss. The OBFs with 3% polymeric microsphere dispersion (AMND) reduced the HTHP and PPA fluid loss by 42% and 50% at 130 °C, respectively. In addition, The AMND maintained good plugging performance at 180 °C. The AMN particles can block leakoff channels of artificial cores, effectively prevent the invasion of oil-based drilling fluids into formations and suppress pressure transfer. OBFs with 3% AMND enabled the corresponding equilibrium pressure to decrease by 69%, compared with that of the OBFs. The polymeric microspheres had a wide particle size distribution. Thus, they can well match leakage channels at various scales and form plugging layers via compression–deformation and packed accumulation, so as to prevent oil-based drilling fluid from invading formations and improve wellbore stability.

Research progress in the synthesis and drilling fluid of alkyl polyglucoside

Application of Synthetic-based Drilling Fluid to Shale-gas Wells in Sichuan Basin

The novel surfactant——alkyl polyglycosides(APG)

Synthesis of gemini surfactant DTDPA and its application to EOR technology

Alkyl Glycine Surfactant: An Efficient High-Temperature Resistant and Biodegradable Foaming Agent for Colloidal Gas Aphron (CGA) Drilling Fluid

Recent advances in polyalkylene glycol base oil

Application and Research Prospect of Functional Polymer Gels in Oil and Gas Drilling and Development Engineering

Highly viscous liquid foam for oil-displacement: Surface & phase behavior enhancement

Dermal losses of nutrients and their significance for human metabolic balance studies.

Research and application of low oil-water ratio organoclay-free oil-based drilling fluid technology

Functional Gels and Chemicals Used in Oil and Gas Drilling Engineering: A Status and Prospective

Research and Performance Evaluation of Polyol Based Drilling Fluid

Novel approach to improve shale stability using super-amphiphobic nanoscale materials in water-based drilling fluids and its field application

Novelty of glycoside surfactant derivatives for sustainable development: A new perspective

Progress of Research into Preformed Particle Gels for Profile Control and Water Shutoff Techniques

Study on small molecule gel fracturing fluid and its in-situ convertion into efficient oil displacement agent

Synthesis and Plugging Performance of Nano-Micron Polymeric Gel Microsphere Plugging Agents for Oil-Based Drilling Fluids

Study of an anti-high-temperature and salt-resistance alkyl glycine foaming agent and its foam stabilizing mechanism

The Research of Polymer Film-Forming Plugging Agent for Drilling Fluid

Organosiloxane-Modified Auricularia Polysaccharide (Si-AP): Improved High-Temperature Resistance and Lubrication Performance in WBDFs

Alkyl Polyglycoside/1-naphthol Formulations with Ultra-low Interfacial Tensions Against N-octane for Enhanced Oil Recovery