Abstract:A dual-machine horizontal automatic drilling and riveting system for aircraft panel assembly is presented in this paper. Two cooperative machines are adopted, like a two-robot system, to achieve the unobstructed workspace, so it can be applied in an efficient assembly line. Different from the current deign wisdom to ensuring the riveting accuracy by increasing the machine stiffness, which detrimentally results in higher masses to be moved and sophisticated reinforcements being used, this paper proposes a disturbance observer (DOB) based design method of riveting force controller for adaptive riveting with high accuracy driven heads, reducing the dependence of automatic riveting on high stiffness of machine. This method simplifies the force-induced deformation error compensation problem to a force control problem, which has rarely been studied before in literature. The separate layout leads to weak machine stiffness in the whole workspace and the stiffness varies with machine pose greatly, which makes it difficult to establish an accurate force-induced deformation error compensation model. To make the riveting machine precisely generate the desired force under such stiffness-varying conditions, a robust control algorithm is designed: the disturbance observer is introduced to address the robust stability against model parameter variance caused by the change of system stiffness with pose, and the feedforward controller can achieve the high-bandwidth force control to ensure the riveting efficiency. The model identification experiments are carried out for different machine stiffness. Validation riveting experiments have been conducted to verify the proposed controller on the dual-machine riveting system. The results show that, compared with previous displacement control, the proposed force controller can ensure the consistency of driven heads through accurate force control.

Study on Normal Vector Measurement Method in Auto-drilling & Riveting of Aircraft Panel

Pneumatic rivet feeding technology for automatic aircraft panel drilling and riveting machine

Research on Surface Normal Measurement and Adjustment in Aircraft Assembly

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Dynamic Modeling and Sensitivity Analysis of Dual-Robot Pneumatic Riveting System for Fuselage Panel Assembly

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Study on Robot Automatic Drilling of Carbon Fiber Reinforced Plastics (CFRP)

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Positioning variation analysis and control for automated drilling in aircraft manufacturing

Kinematic Modeling and Base Frame Calibration of a Dual-Machine-based Drilling and Riveting System for Aircraft Panel Assembly

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Kinematic Modeling and Parameter Identification of A New Circumferential Drilling Machine for Aircraft Assembly

Research on aircraft skin rivet detection technology based on the normal vector-density clustering algorithm

Development and Error Analysis of the Normal Vector Detection of End Effector for Aircraft Component Drilling

Experimental Study of Automatic Rivet Feeding System of Robot Automatic Drilling & Riveting

Method for Extracting Hole Parameters of Aircraft Surface Based on Linear Laser Scanning

Normal direction measurement in robotic drilling and precision calculation

Real-Time Normal Measurement and Error Compensation of Curved Aircraft Surface Based on On-line Thickness Measurement.