Abstract:Pneumatic percussive riveting is an important way to join the sheet metals. In order to ensure the load transfer and the fatigue performance of riveted joint, the interference of the rivet/hole is strictly specified. The interference of the rivet/hole is highly correlated with the process capability of the pneumatic hammer and the diameter of the pre-hole. It is a critical step to choose the appropriate pneumatic hammer to ensure the interference requirements. Energy per blow of the pneumatic hammer is a proclaimed parameter from the riveting hammer manufacturer. It is difficult for the designer to choose the riveting hammer in practical riveting scheme based on energy per blow. Tolerance analysis is an efficient way to model the manufacturing variation and implement process control. This paper presents the tolerance allocation of the pneumatic percussive riveting based on the process capability of the pneumatic hammer. In order to obtain the designed interferences of the rivet/hole, a tolerance chain is built with the process capability of the pneumatic hammer, the diameter of the pre-hole and the diameter of the rivet shank. The process capability of the pneumatic hammer is represented with the interferences of the rivet/hole after riveting. It is an intuitive parameter for the designer to choose the riveting hammer in practical riveting scheme. The process capability of the pneumatic hammer is obtained from the designed riveting experiments with the pneumatic percussive riveting platform. The diameter of the pre-hole affects the interference of the rivet/hole also. The tolerance for manual hole-drilling should be determined to assure the interference requirements and high drilling operation efficiency simultaneously. The variation of the pre-hole is obtained from the manual drilling experiments and diameter measurements. Different hole-drilling results in different mating conditions between the pre-hole and the rivet. The fit conditions of different pre-holes are modeled and the final interferences after riveting are analyzed. Worst case method and statistical analysis method are two common methods for tolerance analysis. For the manual hole-drilling and the pneumatic percussive riveting, worst case method is employed to analyze the constructed tolerance chain in order to accomplish the interferences of the rivet/hole. The different analyzed dimensions, rivet-hole clearances and pre-hole drilling variation, are investigated respectively. The reported work enhances the understanding of the tolerance allocation for the pneumatic percussive riveting. The interference based process capability of the pneumatic hammer provides good reference for pneumatic hammer choosing in riveting scheme. The reported tolerance chain of the interference could be used for the tolerance determination of manual hole-drilling with good quality and high efficiency.

Pneumatic rivet feeding technology for automatic aircraft panel drilling and riveting machine

Experimental Study of Automatic Rivet Feeding System of Robot Automatic Drilling & Riveting

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Dynamic Modeling and Sensitivity Analysis of Dual-Robot Pneumatic Riveting System for Fuselage Panel Assembly

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Hybrid Position/Force Control for Dual-Machine Drilling and Riveting System

Effect of Riveting Parameters on the Quality of Riveted Aircraft Structures with Slug Rivet

Research Status of Aircraft Automatic Drilling and Riveting System and Its Key Technology

Automatic Feeder Design in Paper Honeycomb Parts Fixation System

An efficiency and quality based automatic drilling-riveting system for aero-structures assembly

Study on Robot Automatic Drilling of Carbon Fiber Reinforced Plastics (CFRP)

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Optimization of Riveting Assembly Process Parameters for Aviation Large Panels Based on Mesoscopic Features

Extracting Technicians' Skills for Human-Machine Collaboration in Aircraft Assembly

Effect of riveting parameters on the forming quality of riveted lap joints with reduced countersunk head half-crown rivet

Process Capability Based Tolerance Allocation in Pneumatic Percussive Riveting