Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Influence of Supporting Base Characteristics on Shrinkage-Induced Stresses in Concrete Pavements

Analysis of Shrinkage-Induced Stresses in Concrete Pavements

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Modeling on Shrinkage Stress in Early-Age Concrete Pavements

Modeling Stress-Dependent Anisotropic Elastoplastic Unbound Granular Base in Flexible Pavements

Elastoplastic Analysis of Asphalt Concrete Pavement

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

STUDY ON STRESS INTENSITY FACTOR AFFECTED BY FRICTION COEFFICIENT BETWEEN SURFACE LAYER AND SUBBASE

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Calculation of Shrinkage Stress in Early-Age Concrete Pavements. I: Calculation of Shrinkage Strain

Calculation of shrinkage strain in early-age concrete structures---an example with concrete pavements

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Analysis of the Load Stress of BFRP Continuously Reinforced Composite Pavement

Analysis of the Deep-Seated Concrete Slab for Settlement Control at Bridge Approach Embankment

Dynamic Response of Reinforced Pavements System Subjected to Moving Loads

Calculation of Shrinkage Stress in Concrete Structures with Impact of Internal Curing

Improved Analytical Model and Algorithm for Computing Expansive Soil–Induced Stresses in Pavements

Calculation and Analyses of Shrinkage Induced Stresses in Self-Leveling Floor Layer