Abstract:Mesoporous carbon materials with ultra-thin carbon pore walls and highly dispersed Ni nanoparticles have been successfully prepared by using two different SBA-15 silicas as hard templates and 2,3-dihydroxynaphthalene (DHN) as a carbon precursor. The nickel precursor was a concentrated nickel nitrate hexahydrate [Ni(NO3)(2)center dot 6H(2)O] solution in 2-propanol, which was added to the carbon-silica nanocomposite prior to thermal treatment. The samples studied were analyzed by thermogravimetry (TG), nitrogen adsorption at -196 degrees C, powder X-ray diffraction (XRD), Raman spectroscopy, scanning and transmission electron microscopy (STEM), and in situ electron diffraction X-ray spectroscopy (EDX). While TG analysis revealed carbon contents lower than 30 wt.-%, nitrogen adsorption provided information about the homogeneity of the carbon thin film deposited onto the mesopore walls of the ordered silica templates SBA-15. The templates, carbon-silica nanocomposites, and carbon inverse replicas with nickel nanoparticles exhibit uniform pores, high surface areas, and large pore volumes. Partially graphitic carbon was identified by the presence of a characteristic G band in the Raman spectra, whereas the diffraction peak attributed to the stacking of graphene planes was not observed by powder XRD. The presence of ordered domains in the carbon materials studied was confirmed by small angle XRD and STEM imaging. In addition, the STEM images revealed that the nickel nanoparticles are uniform in size, ca. 3 nm, and are homogeneously dispersed on the tubular carbon walls. A few larger clusters of nickel, ca. 60 nm, present on the external surface, were identified by powder XRD as metallic Ni. The in situ EDX revealed that the small nanoparticles are largely composed of Ni with traces of NiO. Similar nanoparticle dispersions have been reported only for Ni-containing multiwalled carbon nanotubes (CNTs), whereas previously reported ordered mesoporous carbon materials, CMK-3, possess larger Ni/NiO nanoparticles. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2009)

Preparation of Honeycomb-Like Nio with Nanogrooves by Using Electrospun Nanofibrous Webs As Templates

Synthesis of Porous NiO and ZnO Submicro- and Nanofibers from Electrospun Polymer Fiber Templates

Nickel Nanoparticles Embedded in Porous Carbon-Coated Honeycomb Ceramics: A Potential Monolithic Catalyst for Continuous Hydrogenation Reaction

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Rapid one-step synthesis and electrochemical performance of nio/ni with tunable macroporous architectures

Preparation and Electrical Conductivity of Pt/NiO Nanofibers

Electrospun Nanofibers of Nio/Sio2 Composite

From Three‐Dimensional Flower‐Like Α‐ni(oh)2 Nanostructures to Hierarchical Porous NiO Nanoflowers: Microwave‐Assisted Fabrication and Supercapacitor Properties

Ni Hollow Nanospheres: Preparation and Catalytic Activity

Template-free Sonochemical Synthesis of Hierarchically Porous NiO Microsphere.

Porous Hierarchical Nickel Nanostructures and Their Application As a Magnetically Separable Catalyst

The preparation of hierarchical tubular structures comprised of NiO nanosheets with enhanced supercapacitive performance

Synthesis Of A Novel Nio Tube With Porous Surface Constructed By Nanoworms

Fabrication of LaNiO3 Porous Hollow Nanofibers Via an Electrospinning Technique

Oriented NiO nanosheets with regular hexagonal nanopores

Porous Ni/NiO nanohybrids for electrochemical catalytic glucose oxidation

Synthesis of Biomorphous Nickel Oxide from a Pinewood Template and Investigation on a Hierarchical Porous Structure

Preparation and Catalytic Performance of Ni/NiO@C Using Bamboo As Source of Porous Carbon

Self-organized NiO architectures: Synthesis and catalytic properties for growth of carbon nanotubes

Preparation and Surface Activity of Single‐Crystalline NiO(111) Nanosheets with Hexagonal Holes: A Semiconductor Nanospanner