Abstract:The Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers were prepared using sol-gel process combined with electrospinning. The thermal decomposition and phase inversion process of precursor nanofibers and the effects of calcination temperature and SiO2 content on the phase composition, microstructure, morphology and magnetic property of the resulting nanofibers were studied by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, high resolution transmission electron microscopy and vibrating sample magnetometer. The experimental results show that the cubic spinel structure is basically formed when the precursor nanofibers are calcined at 450 ℃ for 2 h. The average grain size of Ni0.5Zn0.5Fe2O4 contained in the composite nanofibers with 10 % SiO2 and their specific saturation magnetization and coercivity increase with increasing calcination temperature. Amorphous SiO2 additive can effectively restrain the growth of Ni0.5Zn0.5Fe2O4 nanocrystals. As a result, with SiO2 content increasing from 0 to 20 % , the average grain size of Ni0.5Zn0.5Fe2O4 in the prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers calcined at 900 ℃ for 2 h decreases from 81.6 to 13.3 nm, and the specific saturation magnetization of these samples monotonically decreases, whereas the coercivity initially increases and then decreases due to the change of magnetic domain structure from multi-domain to single-domain along with the reduction in grain size. In addition, with the increase of SiO2 content, the diameter of the as-prepared Ni0.5Zn0.5Fe2O4/SiO2 composite nanofibers gradually increases and the surface becomes smooth.

Electrospun Nanofibers of Nio/Sio2 Composite

Preparation of One-Dimensional Ni0.5 Zn0.5 Fe2O4/SiO2 Composite Nanostructures and Their Magnetic Properties

Characterization of NiFe2O4 nanofibers prepared by electrospinning technique

Electrospinning preparation of Co_(0.5)Ni_(0.5)Fe_2O_4 nanofibers and its influencing factors

Preparation and Electrical Conductivity of Pt/NiO Nanofibers

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Fabrication of LaNiO3 Porous Hollow Nanofibers Via an Electrospinning Technique

LaMnO3 and La0.875Sr0.125MnO3 Nanofibers via Electrospinning

Poly(Methyl Methacrylate)/Silica Nanocomposite Fibers by Electrospinning

Fabrication of Ni@SiC Composite Nanofibers by Electrospinning and Autocatalytic Electroless Plating Techniques

Electrospinning Fabrication, Characterization and Magnetic Properties of Co0.5Ni0.5Fe2O4 Nanofibers

Fabrication and Characterization of NiTiO3 Nanofibers by Sol–gel Assisted Electrospinning

Nanofibers of LiMn2O4 by electrospinning

Preparation and Characterization of Nylon-6/Poly(vinyl Alcohol) Ultrafine No-Woven Fabrics

Synthesis of Porous NiO and ZnO Submicro- and Nanofibers from Electrospun Polymer Fiber Templates

Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment

Hierarchical electrospun SiO2 nanofibers containing SiO2 nanoparticles with controllable surface-roughness and/or porosity

Facile Synthesis Via Electrospinning of a Tetraethoxysilane/Polyvinylpyrrolidone Sol and Characterization of Ultrafine Crystalline SiO2 Nanofibers

Nanostructured LiCoO2 and LiMn2O4 fibers fabricated by a high frequency electrospinning

Enhanced performance of SnO 2 –C composite fibers containing NiO as lithium-ion battery anodes

Electrospinning Preparation of LaFeO 3 Nanofibers