Abstract:This paper presents an investigation into the effects of particle-size distribution on the critical state behavior of granular materials using discrete element method (DEM) simulations on both spherical and non-spherical particle assemblies. A series of triaxial test DEM simulations examine the influence of particle-size distribution (PSD) and particle shape, which were independently assessed in the analyses presented. Samples were composed of particles with varying shapes characterized by overall regularity (OR) and different PSDs. The samples were subjected to the axial compression through different loading schemes: constant volume, constant mean effective stress, and constant lateral stress. All samples were sheared to large strains to ensure that a critical state was reached. Both the macroscopic and microscopic behaviors in these tests are discussed here within the framework of the anisotropic critical state theory. It is shown that both OR and PSD may affect the response of the granular assemblies in terms of the stress–strain relations, dilatancy, and critical state behaviors. For a given PSD, both the shear strength and fabric norm decrease with an increase in OR . The critical state angle of shearing resistance is highly dependent on particle shape. In terms of PSD, uniformly distributed assemblies mobilize higher shear strength and experience more dilative responses than specimens with a greater variation of particle sizes. The position of the critical state line in the e– p ′ space is also affected by PSD. However, the effects of PSD on critical strength and evolution of fabric are negligible. These findings highlight the importance of particle shape and PSD that should be included in the development of constitutive models for granular materials.

GIS-Based Quantitative Analysis of Orientation Anisotropy of Contaminant Barrier Particles Using Standard Deviational Ellipse

The Influence of Particle-Size Distribution on Critical State Behavior of Spherical and Non-Spherical Particle Assemblies

Theories and Methods for Soil Grain Orientation Distribution in SEM by Standard Deviational Ellipse

An Improved Quantification Method for Characterisation of Clay Microstructure Using SEM

Orientation of aggregates of fine-grained soil: quantification and application

Quantitative research on the orientation of microstructures of clayey soil

QUANTITATIVE ANALYSIS OF ORIENTATION DISTRIBUTION OF SOIL GRAINS BASED ON SLOPE-ASPECT THEORY

A Coupled CFD-DEM Investigation into Suffusion of Gap-Graded Soil Considering Anisotropic Stress Conditions and Flow Directions

Numerical and experimental estimation of anisotropy in granular soils using multi-orientation shear wave velocity measurements

Particle extraction and quantitative analysis of soil microstructure from SEM using spatial analyst tools in ArcGIS

3D Visualization and Porosity Computation of Clay Soil SEM Image by GIS

Quantitative examination of microstructural transformations of clay-rich sediments in river-dominated deltas under the influence of polluted pore water

Investigating the effect of particle angularity on suffusion of gap-graded soil using coupled CFD-DEM

Stereological Analysis of Aggregate Distribution in Contaminant Barrier Concrete

Anisotropic and Noncoaxial Behavior of K0-Consolidated Soft Clays under Stress Paths with Principal Stress Rotation

Experimental Study of Drained Anisotropy of Granular Soils Involving Rotation of Principal Stress Direction

Analysis of Particle Shape Characteristics of Lunar Soil Simulant and Its Effect on Shear Strength

A General Method for Quantifying the Shear Strength Anisotropy of Soil

Study on 3D Fractal Dimension of Clayey Soil by Use of GIS

Spatial Variability Characterization of Clayey Waste Soils and Its Impact on Probabilistic Stability Assessment of a Landfill Slope

Quantification Of Microstructure Of Fine Grained Soil