Abstract:The difference field RCS from a target above a rough surface is derived. The electric field integral equations (EFIE) of the difference induced currents Jsd on the surface and J0 on target are developed. Because of the strongest scattering in the specular direction, a small interface taken along the converse specular direction is attributed to computation of the surface scattering upon the target. A fast mutual-coupling iterative method is developed to solve the two EFIEs. The interface length for effective computation is discussed. Using the Monte Carlo method, scattering from a target, such as a cylinder and a square column, above the P-M rough surface is numerically simulated. Scattering from a cylinder above the rough surface in the specular direction is enhanced significantly. The Bi-RCS of a square column above the rough surface shows two peaks in forward and backward directions. As a model of rough sea surface, when the surface wind speed increases, the scattering peaks become lower, and more defused scattering shows the angular scattering pattern. Introduction Scattering from the targets above a rough surface has attracted more interests in recent years. In the combined target-surface problem, the difference field cross section was introduced by Johnson [1] to remove the dependence on incident taper wave width. Scattering for the combined target-surface problem and surfaceonly problem are respectively calculated, and their difference shows scattering attributed by the target and interaction between the target and rough surface. In this paper, we derive the EFIEs of the difference induced current on rough surface and current on the target. A mutual-coupling iterative approach is developed to solve the EFIEs. The interface length for the iterative calculation is discussed. As examples, scattering from a cylinder and a square column above a rough surface are simulated. It can be seen that scattering from the cylinder above a rough surface is significantly enhanced in the specular direction due to interactions of the target and the underlying surface. Variation of the difference induced currents on the interface also demonstrates such interactions. Scattering from a square column has two peaks in the backward and forward directions due to its specific geometry. As a model of a target located above the wind-driven sea surface, numerical simulations show the angular pattern of bistatic scattering versus oceanic status. When the surface wind speed increases, scattering peaks become weaker and more angular defused scattering are dominated. Theory and Method In a model of the target above rough surface, both the total and differential cross section are previously related to the surface length illuminated by incident wave. In order to remote the dependence on illuminated surface length, the difference of the scattering field, Es1, attributed by both the target and surface and the scattering field by a rough surface only, Es0, is calculated as Esd, which is used to compute the difference field cross section σd [1], which demonstrates how much the scattering attributed by the target and interaction between the target and underlying rough surface. It does not depend upon the illuminated rough surface length. As shown in Fig.1, a two-dimensional (2D) target (perfect electric conductor, PEC) is located above a 2D PEC rough surface. As the incident tapered wave is incident on the target and rough surface, the induced current on the target is defined as J0, and the induced current on the surface is Js1. The EFIEs are written as [2] 0 = ET (r)− jkη ∫ c Jo(r ′) ·G(r, r′)dr′ − jkη ∫ S Js1(r ′) ·G(r, r′)dr′(r ∈ c) (1) 202 Progress In Electromagnetics Research Symposium 2005, Hangzhou, China, August 22-26

Study on electromagnetic backscattering and Doppler spectrum of a moving spherical target above time-varying sea surface

Numerical Simulation of Bistatic Scattering From a Target at Low Altitude Above Rough Sea Surface Under an EM-Wave Incidence at Low Grazing Angle by Using the Finite Element Method

Fast Iterative Approach to Bistatic Scattering of the Electromagnetic Difference Fields from the Target Above a Randomly Rough Surface

Quantitative Research of Cutoff Wavenumber and Wave Spectrum for Electromagnetic Scattering Computation with Two-Scale Method

Application of the Improved SBR-TSM Based on MPI to EM Scattering from Multiple Targets Above a 3-D Rough Sea Surface

Study on Sea Surface Spectrum Model for Electromagnetic Scattering in Ku-Band Based on Two-Scale Model

Fast Solution of Scattering and Micro-Doppler Features from Moving Target Using a Tailored Shooting and Bouncing Ray Method

Electromagnetic Scattering Characteristics of Pec Targets in the Terahertz Regime

Numerical Simulation of the Doppler Spectrum of a Flying Target above Dynamic Oceanic Surface by Using the FEM-DDM Method

Parabolic Equation Modeling of Electromagnetic Wave Propagation over Rough Sea Surfaces

Computing the Far-Field Scattered by a Spherical Target Near the Seabed

The Doppler Characteristics of Sea Echoes Acquired by Motion Radar

Simulation Of Transient Scattering From Ocean Surface With Ship Wake

Modeling of bistatic scattering from an underwater non-penetrable target using a Kirchhoff approximation method

Bistatic reflection of electromagnetic waves from random rough surfaces: Application to the sea surface and snowy-covered

Modeling of EM Scattering by Composite Surfaces Made of Wake Due to a Submerged Body and Wind-Driven Sea Waves

Numerical Simulation of Electromagnetic Scattering by Moving Objects Based on Relativity

Composite Backscatter Characteristics of Conductive/Dielectric Ships and Sea Surfaces with Breaking Waves under High Sea Conditions

Time-Frequency Analysis of Electromagnetic Pulse Response from a Spherical Target

Iterative Approach to Scattering from the Targets above a Rough Surface

Electromagnetic Scattering for Multiple Moving Targets Above/On a Rough Surface Using Multi-Dynamic-Octrees-Based SBR Algorithm