Abstract:This work reports a highly conductive and stable composite polymer‐ceramic electrolyte for high‐energy‐density and high‐safety solid‐state Li‐metal batteries. The electrolyte not only exhibits a high Li+ transference number but also significantly improves Li+ transport and lowers contact resistance relative to electrodes. The corresponding Li/LiFePO4 and high‐voltage Li/LiNi0.8Mn0.1Co0.1O2 batteries demonstrate excellent cycling performance at room temperature. Composite polymer‐ceramic electrolytes have shown considerable potential for high‐energy‐density Li‐metal batteries as they combine the benefits of both polymers and ceramics. However, low ionic conductivity and poor contact with electrodes limit their practical usage. In this study, a highly conductive and stable composite electrolyte with a high ceramic loading is developed for high‐energy‐density Li‐metal batteries. The electrolyte, produced through in situ polymerization and composed of a polymer called poly‐1,3‐dioxolane in a poly(vinylidene fluoride)/ceramic matrix, exhibits excellent room‐temperature ionic conductivity of 1.2 mS cm−1 and high stability with Li metal over 1500 h. When tested in a Li|electrolyte|LiFePO4 battery, the electrolyte delivers excellent cycling performance and rate capability at room temperature, with a discharge capacity of 137 mAh g−1 over 500 cycles at 1 C. Furthermore, the electrolyte not only exhibits a high Li+ transference number of 0.76 but also significantly lowers contact resistance (from 157.8 to 2.1 Ω) relative to electrodes. When used in a battery with a high‐voltage LiNi0.8Mn0.1Co0.1O2 cathode, a discharge capacity of 140 mAh g−1 is achieved. These results show the potential of composite polymer‐ceramic electrolytes in room‐temperature solid‐state Li‐metal batteries and provide a strategy for designing highly conductive polymer‐in‐ceramic electrolytes with electrode‐compatible interfaces.

Li/LiFePO4 batteries with room temperature ionic liquid as electrolyte

Improving Electrochemical Properties of Room Temperature Ionic Liquid (RTIL) Based Electrolyte for Li-ion Batteries

A room-temperature ionic liquid-based superionic conductive polymer electrolyte with high thermal stability for long-cycle-life lithium batteries

Liquid-like Poly(ionic Liquid) As Electrolyte for Thermally Stable Lithium-Ion Battery

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

Ionic liquid boosting the electrochemical stability of a poly(1,3‐dioxolane) gel electrolyte for high‐voltage solid‐state lithium batteries

LiNO 3 and TMP enabled high voltage room-temperature solid-state lithium metal battery

A new type of composite electrolyte with high performance for room-temperature solid-state lithium battery

Single Lithium-Ion Polymer Electrolytes Based on Poly(ionic Liquid)s for Lithium-Ion Batteries

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite.

Improving Room‐Temperature Li‐Metal Battery Performance by In Situ Creation of Fast Li+ Transport Pathways in a Polymer‐Ceramic Electrolyte

Expanding the active charge carriers of polymer electrolytes in lithium-based batteries using an anion-hosting cathode

Novel Organic-Inorganic Hybrid Electrolyte to Enable LiFePO4 Quasi-Solid-State Li-Ion Batteries Performed Highly Around Room Temperature.

Room-Temperature Performance of Poly(Ethylene Ether Carbonate)-Based Solid Polymer Electrolytes for All-Solid-State Lithium Batteries

A Polymer-in-Salt Electrolyte Enables Room Temperature Lithium Metal Batteries

Ionogel hybrid polymer electrolytes encompassing room-temperature ionic liquids for 4V-class Li-metal batteries operating at ambient temperature

Ionic Liquid Enabling Stable Interface in Solid State Lithium Sulfur Batteries Working at Room Temperature

Self‐Extinguishing and Low‐Cost Quasi‐Solid Polymer Electrolyte for Room Temperature Lithium Metal Batteries