Abstract:Taking a six-cylinder diesel engine as the example, noise signals were recorded in different working conditions. Based on the wavelet packet decomposition and coefficient reconstruction of the recorded noise signals, signals in various frequency bands were extracted. Subband signals relevant to the engine combustion process were combined and reconstructed, and noise signals resulted from the combustion excitation were obtained. Moreover, the continuous complex wavelet transform was adopted to analyze the reconstructed signal. The three-dimensional wavelet power spectrum was also calculated to investigate the combustion condition of each cylinder and extract the related information. The analysis results show that the signal energy of combustion noise accounting for small proportion mainly distributes in the high frequency region of 20.480～24.576 kHz, when engine works at the speed of 2 200 r/min with full load. At the idle condition of 650 r/min, combustion noise signal energy is mainly concentrated in the medium and low frequency band of 1 024～2 521 Hz, and has a larger contribution to engine noise.

Study on the Time-Frequency Characteristics of Engine Noise Signal Based on EMD and HHT

Study on the Method of EMD-Based Vibration Signal Time-Frequency Analysis

Application of EEMD and GST Method in Noise Characteristics Analysis of Internal Combustion Engine

STUDY ON THE AUTOCORRELATION-BASED VIBRATION SIGNAL EMD DECOMPOSITION METHOD IN ROTATING MACHINERY

Vibration Mode Extraction Method Based on the Characteristics of White Noise

APPLICATION OF EMD METHOD WITH DATA EXTENSION TECHNIQUE BASED ON RBF NEURAL NETWORK TO TIME-FREQUENCY ANALYSIS

Studying Noise Contributions of IC Engine Via MEEMD Method

Study on the EMD-based transverse rotor crack detection

Tow Ship Noise Cancellation Using Empirical Mode Decomposition

Time-frequency Characteristics of Noise Signals Based on S Transform for Internat Combustion Engine

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Feature Extraction of Combustion Noise in Internal Combustion Engine Based on Wavelet Transform Technology

Internal Combustion Engine Noise Analysis with Time-Frequency Distribution

Noise Source Identification of Internal Combustion Engine based on Independent Component and Wavelet Analysis

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Noise source identification of internal combustion engine using sound mode technology

Investigation on reciprocating engine condition classification by using wavelet packet hilbert spectrum

Study of Engine Noise Based on Independent Component Analysis

A Study on the Separation of Valve-slap Excitation and Combustion Excitation in IC Engine Using M-EEMD Method

Study on the Time-Frequency Characteristics of Engine Induction Noise during Accelerating Period Based on S Transform

Investigation on Diesel Engine Fault Diagnosis by Using Hilbert Spectrum Entropy